|
The following SPAUN multiswitches are compatible
with the DIRECTV Triple LNB satellite dishes: |
|
|
|
|
|
LNB Supply Mode (Red Dial) |
|
|
|
The red dial on the multiswitch labeled "LNB"
MUST be set on the 22kHz |
|
|
|
Connecting the LNB’s to the Spaun Multiswitch |
|
|
|
All four coax cables must be connected to the
four satellite inputs on the Spaun switch. |
|
|
|
Synchronous Level Adjuster (Small orange dials) |
|
|
|
To adjust (decrease) different input levels by
0…-10dB if necessary. |
|
|
|
Use of Terrestrial Input |
|
|
|
Terrestrial input allows for either Off-air
antenna OR Cable to be passed through the
multiswitch. A
diplexer (SEW120F)
at each receiver where terrestrial output is
required must be used to separate the two
combined frequencies. |
|
|
|
Assembly & Installation |
|
|
|
Do not mount the multiswitch in damp conditions.
Protect from weather and allow adequate
ventilation. |
|
|
|
The following multiswitches are NOT
compatible with the Triple LNB systems: |
|
|
|
SMS5400NF / SMS5401NF / SMS5600NF / SMS5601NF /
SMS5800NF / SMS5801NF / SBK5500NF |
|
|
 |
|
|
|
View ALL SPAUN Satellite
Equipment |
|
|
| |
| |
