Do you have trouble using your cell phone in your home or office? One of the only dual band amplifiers available, the YX510 cell phone signal booster is ideal for improving the coverage for 800 and 1900 Mhz carriers.
30 Day Guarantee – We are confident this product will improve your cell phone signal. So much so, that we offer a no questions asked 30 day return policy on any Wi-Ex zBoost product. All product components must be returned in the original packaging.
Not sure what frequency your cell phone operates in? Cell phone service providers operate on different frequency ranges depending on your location. For more information, weve created a "How To" for determining your cellular frequency range, more>>
50ft of connection cable is provided to connect the antenna to the base unit. Should you need a longer (replacement, not addition to) cable, we have them available in various lengths (60ft, 70ft, 80ft, 90ft, and 100ft lengths)
Designed for consumers, the zBoost dual band cell phone signal booster extends a zBoost Cell Zone for single or multiple users in homes or offices simulatneously. ZBoost Dual Band is compatible with all phones operating on PCS(1900Mhz) and CEL (800 MHz) except Nextel. Package includes everything you need -- amplifier base unit, power supply, base unit antenna, low-loss SATV coaxial cable (RG6), signal antenna and mounting hardware. The omni-directional antennas are easy to orient and receive from multiple cell towers.
Not sure what frequency your cell phone operates in? Cell phone service providers operate on different frequency ranges depending on your location. For more information, weve created a "How To" for determining your cellular frequency range, more >>
Installation
Good Reception: Outside of a window Locate a window where you get signal.
Mount the Signal Antenna outside of the window
Place the Base Unit across the room (15 feet away) where you want to create a Cell Zone™.
Attach the coax cable to the Signal Antenna.
Run the coax cable from the Signal Antenna through the window to the Base Unit using a window entry kit (optional).
Attach the Antenna to the Base Unit and position it so that it is at a 90 degree angle to the Base Unit.
Set the Base Unit on a furniture piece.
Attach the Power Supply to the Base Unit and plug the power supply into an outlet. See the Troubleshooting section if a Red light lights up.
Best Reception: Attic or Roof Installation The following instructions are recommended for the best reception. Once you have confirmed that you have a cell phone signal either outside your home or inside your attic, you are ready to install the Signal Antenna using the supplied mounting brackets, Signal Antenna, and coaxial cable.
Identify the best location around your home with the strongest signal (best signal is typically found on the roof) for attachment of the antenna mounting bracket. For good the signal reception, install the Signal Antenna at the highest possible point in your area. Avoid placing the antenna within 3 feet (1 meter) of metal objects (pipes, metal siding, A/C unit, etc.)
Attach the mounting bracket so that when the Signal Antenna is attached, it will be positioned vertically.
Mount the Signal Antenna to the mounting bracket, making sure that the antenna is positioned vertically
Unroll the RG6 coaxial cable supplied with your zBoost Series kit removing any loops or kinks and attach to the base of the Signal Antenna.
Run the coax cable from the Signal Antenna through the window to the Base Unit using a window entry kit (optional).
Attach the Antenna to the Base Unit and position it so that it is at a 90 degree angle to the Base Unit.
Set the Base Unit on a furniture piece.
Attach the Power Supply to the Base Unit and plug the power supply into an outlet. If a Red light lights up, try further separating the antennas and then see the Troubleshooting section of the manual.
1999-2009 Solid Signal,
Signal Group LLC & Affiliates 