|
| Friday, September 03, 2010 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
Eagle Aspen ROTR100 One-Cable Antenna Rotator (ROTR100) |
|
Model: ROTR100 | SKU: |
|
Availability: In Stock |
|
|
|
|
Features
ELIMINATES THE NEED FOR ROTATOR WIRE
99 programmable memory locations, which can be assigned the same number as the channel being received
One cable carries off-air signals, rotator power, control and pre-amp power
The Hall sensors count every motor revolution resulting in 2 degree accuracy
120 inch lbs. of mechanical torque
18VDC at up to 80 ma. When pre-amp is not used, this is automatically sensed and the pre-amp power is switched off. We recommend the Channel Master 0068 Pre-Amp
Display and Control: The indoor controller features a 000 degree to 450 degree digital compass delay
Handheld IR Remote: Software codes available on most higher end universal remote controls
Will NOT work with antennas that exceed 131 inches, so the CM3671 and HD8200U are not compatible
Direct access to a location
Specifications
New Spin on an Old Technology
Introducing the new Eagle Aspen single cable off air antenna rotator; model ROTR100. The days of having to run separate "3 conductor rotor wire" between the drive unit and the control unit are in the past. Pro Brand has developed the ROTR100 utilizing DiSEqC code that sends commands to control the drive unit along the same coaxial cable that brings the television signals from the off air antenna into the house. Optional pre-amplifier power can also be supplied via this same cable. Whether performing a new install or retrofitting an existing antenna system, the ROTR100 provides for a fast and easy installation. Additional features have been added making the entire system installer and user friendly.
Rotation Time 60 second (max) for 360 deg
Motor Current 350 mA (max)
Mechanical Torque 120 inch-lbs
Return Accuracy 2 deg
Position Sensor Hall sensor
Signaling Format DiSEqC 1.2
Pre-amplifier Power +17VDC at 50mA (max)
Input Power 120VAC,20W
Attenuation -Control Unit 1 dB (max) 54-806M Hz
Attenuation -Drive Unit 1 dB (max) 54-806MH
Suggested Coax Length: 200 (max) RG-6 solid Copper center conductor with no pre-amp
150 (max) as above, but with an 80nA pre-amplifier
75 (max) RG-6 copper coated steel with no pre-amp
Description
Eliminate the need for multiple cable runs with this revolutionary antenna rotator which uses the same coaxial cable that you run to your television to control the rotator.
|
|
| Customers who purchased this item also considered: |
|
|
|
|
|
Back to Top
|
|
|
|
|
|
1999-2010 Solid Signal,
