RedMere technology is a breakthrough in the functionality and efficiency of HDMI cables. High Speed HDMI Cables with RedMere can reliably distribute High Speed signals to much greater distances up to 65 feet (20 meters) at the full 10.2 Gbps data throughput as opposed to the 25 foot distance for HDMI cables without RedMere technology. This can be done with thinner and lighter cables which are easier to handle and route through your home theater system and which put less stress on your equipment's HDMI ports.
Normally a cable of this length would require minimum 24 AWG conductors to support High Speed HDMI features but the RedMere chip in this cable allows it to support all High Speed HDMI features with only 36 AWG conductors. The connector heads measure a mere 5/8" wide and 1/4" thick. The connector head at the source is only 9/16" long while the connector head at the sink (TV) which houses the RedMere chip is only 13/16" long.
Note that HDMI Cables with RedMere are directional. One end must be connected to the source device (e.g. blu-ray player) and the other end to the sink/display (e.g. HDTV). Hooking them up backwards will not damage anything they just won't transmit a signal. Also note that these cables are fully compatible with switches splitters matrix devices etc. They can be used in any application in which a normal HDMI cable can be used and many applications where HDMI extenders would otherwise be required!
Tech Choice HDMI Cables with RedMere include several features that separate them from other cables with RedMere. The connector heads are fully shielded with zinc alloy which helps prevent RFI and EMI from interfering with your HDMI signal. They also have the highest rated pull force of all HDMI Cables with RedMere which means you won't accidentally pull the cable head off by tugging on the cable instead of the connector. The tooled polycarbonate connector heads are the smallest HDMI connectors available which means they can fit in tight spaces such as on an Xbox 360 Slim with an analog audio cable installed. They also present a cleaner and neater appearance than ordinary injection molded connector heads. Finally the Thermoplastic Elastomer (TPE) jacket is able to withstand more abuse than ordinary ABS or PVC jackets which means your cable will last much longer in a heavy use environment than otherwise.