Availability: Usually Ships Same Day Condition:New
Your Price: $150299
List Price: $1,899.00
Transmit your HDMI video signal to up to eight displays at distances up to 100 meters using this HDBaseT 1x4 HDMI Splitter from Tech Choice! The primary function of this Splitter is to distribute the video from a single HDMI source to up to four displays. It is also a video extender using the HDBaseT standard. HDBaseT is the superior standard for extending HDMI video signals to distances up to 100 meters over just a single Cat6 Ethernet cable (up to 70 meters using Cat5e cable). Additionally it can be daisy chained up to 8 times giving a maximum total extension distance of up to 800 meters!
Supports 1080p and 3D video modes
Can be daisy chained 8 times for a maximum extension distance of 800 meters Extends 100Base-TX 100Mpbs network traffic
Note: Tech Choice strongly recommends using 22AWG 24AWG or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.
Supports high definition 7.1-channel audio including Dolby TrueHD and DTS-HD Master Audio
Distributes a single input to up to four outputs
Extend up to 100 meters using Cat6 cable (up to 70m using Cat5e)
Supports forward or backward IR extension
Supports minimum 6.75Gbps data transmission rate
Supports HDCP v1.2
Supports Deep Color up to 36-bits (12-bits/channel)
The HDBaseT standard also provides for the transmission of infrared remote control signals and 100Base-TX Fast Ethernet (100Mbps) network traffic. The network connection is input to the Matrix and is distributed to each receiver of the same Cat6 cable that carries the video and IR signals. Each receiver includes a 2-port Ethernet switch for direct connection to network aware equipment or connection to a larger switch for local distribution.
This system provides a minimum data transfer rate of 6.75Gbps which means that it supports High Speed 1080p and 3D video signals as well as high definition multichannel audio including Dolby TrueHD™ and DTS-HD Master Audio™. The kit includes everything you need to get up and running except the Ethernet cable. While it will function using Cat5e we highly recommend using Cat6 or even Cat7 cables for best results.
MAXRAD 1575.42 MHz 3 dBic 5 volt high performance active
/ filtered GPS antenna. USB Comm Interface. Design allows for Magnet or Screw Mount.. Specs. GSA. Contract:. Schedule:. GS-35F-0548P. 70 - Information Technology. Frequency. 1575.42 MHz. Mobile Antenna Mounting ...
eTrex 10 retains the core functionality, rugged construction, affordability and
long battery life that made eTrex the most dependable GPS device available. We improved the user interface and added a worldwide basemap, paperless geocaching and support for spine-mounting accessories.. ...
Phoenix Contact RADISM900RX 900MHz Receiver with DIN-Rail Mount,
The Phoenix Contact unidirectional 900MHz Trusted Wireless receiver operates in
the license-free 902-928MHz ISM band. This radio is DIN-rail mountable and can be powered by 24VDC. Antennas and power supply must be purchased separately.. Features. Spare 900 MHz receiver ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).