The Xtra Link 2 is the only pre-packaged, single part number solution Xantech offers. Designed to solve a specific problem, the set includes everything you need to control a remote VCR, cable box, etc. over an existing coaxial cable.
IR Modulation Frequency Bandwidth: 30-100 kHz
Nominal Reception Range: 30 ft
Maximum Current Output: 100 milliamps
Cable Requirement RG-59/RG-6 coaxial
Maximu Cable Length: One Mile with RG-59
Power: 12 volts DC @ 10 milliamps
Power Supply Included
The Xtra Link 2 utilizes the 29100 IR Receiver which has greatly improved range and interference rejection. The 29100 receives the IR signals from a handheld remote, converts them to DC control signals and passes them to the RF/IR Injector where they are mixed with the RF television signal. This combined signal is carried over a coaxial cable. At the other end of this coax the signals are separated at the RF/IR Coupler and the DC control signal is sent to an infrared emitter placed directly on the IR control window of the component you want to control.
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).