Solid Signal > Cell Phone Accessories > Cellular Antennas


Wilson Electronics Mirror Mount Trucker Cell Antenna 800-1900MHz(301101)

Click Images to Enlarge

Wilson Electronics Mirror Mount Trucker Cell Antenna 800-1900MHz(301101)

Brand: Wilson Electronics           P\N: 301101          

No Reviews Available  Be the first to write one!


Availability: Discontinued

Looking for something similar? Please contact us at info@solidsignal.com or call us at 877-312-4547 for recommendation.


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Solid Signal is an Authorized Reseller of Wilson Electronics products.
Solid Signal is an Authorized Reseller of Wilson Electronics products.
This cellular antenna connects directly to your cell phone with an external antenna adapter and increases your signal up to 10 times. A cell phone adapter is required (353001 to 354006).

Features


  • Connects directly to your cell phone with an external antenna adapter

  • Includes a Two-year Manufacturer Warranty from Date of Purchase

  • Works on frequencies of 800 MHz to 1900 MHz

  • The innovative design results in high efficiency with low losses resulting in the most signal to your cellular phone

  • The versatile cellular antenna works great on trucks, cars, boats, homes, or almost any other application

  • Works on any surface - metal, fiberglass, wood, etc. (no ground is required)

  • Fits standard 3/8 inch x 24 threaded mount

  • 19 inch fiberglass mast raises antenna above obstructions

  • No ground plane required - Built-in ground plane allows for use on any surface - metal, fiberglass, wood, etc.

Specs


The Wilson Dual-Band Cellular Trucker Antenna was carefully designed to minimize loss and maximize gain at every step. In order to design the best dual band truck mount antenna possible, Wilson focused on 2 major areas. The first is the antenna itself which must have its gain maximized both on the 800 MHz band and also on the 1900 MHz band. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. The second design area is the ground which allows proper antenna return currents on the lower 800 MHz frequency as well as the higher 1900 MHz frequency. Wilsons design makes the dual band trucker antenna independent of the ground where the antenna is mounted. This means it is a true "no ground" antenna and will work excellent on the new fiberglass body trucks as well as the standard metal body trucks. The antenna is also designed with an elevated feed system so that the antenna can get as high as possible to maximize signal strength. Wilsons innovative design results in high efficiency and low losses and will get the most signal to your cellular phone. Thanks to these innovations and attention to detail, Wilson Electronics now has the best performing dual band trucker cellphone antenna available.

Up to 90% of the power on both transmit and receive is absorbed within the truck cab and the users head. We solve this problem by channeling all the power from the cellphone to the outside antenna. This results in our trucker antenna transmitting and receiving over 10 times more signal than a cellphone used inside the truck without an outside antenna. In addition to dropout and noise reduction, the Wilson Dual-Band Trucker Antenna eliminates microwave energy radiating into the head. This is achieved by channeling all of the energy out through the external antenna.

Antenna Installation
If you use a knife to remove your antenna from its packaging, be sure not to cut the cable. Screw the three radials into the three holes under the plastic coil housing. Liquid Thread Lock must be used to ensure the radials do not vibrate loose over time. The radials must be tightened snugly with a crescent wrench. For best performance it is important to get the antenna as high up as possible. The radials should be no lower than the top of the truck cab. Mount the cellular antenna at least 8 inches away from any other antennas to avoid interference. Any antenna mount that has a standard 3/8" X 24 thread female receptacle will work with your antenna. Secure the antenna onto the mount by tightening with a crescent wrench or 9/16 open end wrench. CAUTION: Do not over tighten. Route the 10.5 of cable from the antenna to the cellphones location. Connect the male FME connector from your adapter to the female FME from your antenna cable. Connect your adapter to your phone as per the instructions in the following section titled "Attaching your phone to the Adapter".

Attaching your phone to the Adapter
In order to attach your cellular antenna to your cellphone, you will need the adapter which you selected with your antenna. The adapter connects the phone to the antenna cable and transfers power to and from the antenna. Significantly Increases Your Cellphones Range on Send & Receive Helps Eliminate the Dreaded "Dead Zones" Transfers All Microwave Energy from Your Cellphone to the Outside Antenna Eliminates All Microwave Energy Radiating into the Head. No Power Required Works on all Cellphones with compatible adapter (800 & 1900 MHz - Analog & Digital).
Part Number 301101 301701 301119 301133 301130
Frequency Range (MHz) 800/1900 MHz 900/1800 MHz 806-894 MHz / 1850-1990 MHz
Impedance 50 ohms
Antenna Gain (MHz) 5.12 dBi 806-894 / 6.12 dBi 1850-1990
Radiation Omni
Polarization

Vertical

Ground Plane Built-in Ground Plane
Connector FME Female
Material Whip - Stainless Steel / Extension - Fiberglass Whip -Stainless Steel

Whip - Stainless Steel /

 Casing - Fiberglass

Coax Cable RG58 - 10.5 Feet RG58 - 13.5 Feet RG58 - 7 inches
Height 32.0625 inches

18 inches

(24 inches including threadmount)

21.5 inches including spring mount 21 inches including coupler
Mount Standard CB 3/8 inch x 24 Thread 5/8 inch x 7 inch Threaded Mounting Rod 3-Way Mount with Spade Stud Standard 1 inch x 14 thread


Discuss










Product Reviews for Wilson Electronics Mirror Mount Trucker Cell Antenna 800-1900MHz(301101)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2016 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail