Solid Signal > Cell Phone Accessories > Cellular Antennas


Wilson Electronics 301104 Dual Band NMO Mount Cellular Antenna 800-1900 MHz (301104)

Click Images to Enlarge

Wilson Electronics 301104 Dual Band NMO Mount Cellular Antenna 800-1900 MHz (301104)

Brand: Wilson Electronics           P\N: 301104           UPC: 813986000045

5 Star Reviews!       Read Reviews (2)      Write a Review
Availability: Discontinued

Looking for something similar? Please contact us at info@solidsignal.com or call us at 877-312-4547 for recommendation.


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Solid Signal is an Authorized Reseller of Wilson Electronics products.
Solid Signal is an Authorized Reseller of Wilson Electronics products.
The Wilson NMO Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands.

Features


  • Significantly increases your cell phones range on send and receive

  • Includes a Two-year Manufacturer Warranty from Date of Purchase

  • Helps eliminate dreaded "dead zones"

  • No power required

  • Works on all cell phones with compatible adapter (800 & 1900 MHz - Analog & Digital)

  • Reduces or completely eliminates cellphone disconnections and noise

  • Metal ground plane is required (8" diameter minimum)

  • NMO Antennas requires either a roof mount or drilling a hole in to your vehicle for a permanent installation

  • The Wilson NMO Cellular Antenna requires a standard NMO mount (901101, 901102 or 901103)

Specs


Up to 90% of the power on both transmit and receive is absorbed within a vehicle and the users head.  We solve this problem by channeling all the power from the cellphone to the outside antenna.  This results in our NMO antenna transmitting and receiving over 10 times more signal than a cellphone used inside the vehicle without an outside antenna.

The Wilson NMO Cellular Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands.  Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies.  Wilsons innovative design results in high efficiency with low losses and will get the most signal to your cellular phone.  Thanks to these innovations and our attention to detail Wilson Electronics has the best performing NMO cellular antenna available.

Installation:
The Wilson NMO Cellular Antenna requires a standard NMO mount (sold separately).  Most NMO mounts are installed by drilling a hole in the roof of your vehicle.  The cable is then routed under the headliner to the cellphones location.  This provides for an excellent ground plane and very solid permanent installation.
1. Select a location for mounting the antenna. The best location would be centered on the roof, although other locations are acceptable.
2. Depending on the size of the NMO mount purchased, drill a 3/4" or 3/8" hole in the selected location.
3. Route the cable between hole and phone location.
4. Place the NMO mount up through the bottom of the hole.
5. Place 3/4" or 3/8" threaded nut on the top of the mount, outside of vehicle, and tighten.
6. Screw antenna coil into place.

Electrical Properties:
- Frequency Range - 806-894MHz 1850-1990Mhz
- Impedance - 50 Ohms/Both Bands
- Antenna Gain - 4.9 dBi   806 - 894 MHz 5.9 dBi   1850 - 1990 MHz
- System Gain - 10-15 dB
- Radiation – Omni
- Polarization - Vertical
- Wave length - 1 Wavelength 806-894 Mhz 2.1 Wavelengths 1850-1990 Mhz
- Ground plane - Metal Ground Plane is Required

Mechanical Properties:
- Material - Whip, Stainless Steel
- Height - 13.88"


Discuss










Product Reviews for Wilson Electronics 301104 Dual Band NMO Mount Cellular Antenna 800-1900 MHz (301104)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!

Average Review (2 reviews):5 Star Reviews!

Five Stars:
 2 (100%)
Four Stars:
 0 (0%)
Three Stars:
 0 (0%)
Two Stars:
 0 (0%)
One Star:
 0 (0%)
Recent Review:
koz303 - Wheat Ridge, CO - 6/8/2016
800 Mhz beams in signals



Customer Reviews:
Filter:
800 Mhz beams in signals
- Wheat Ridge, CO -
i installed this antenna for my scanner for the FRCC 700-800 band and the signals are beaming in, 5 bars all communications. I highly recommaend it.
Multiple dB improvement over omni antenna in both RSSI and SINR on 700MHz VZW LTE
- Minocqua, WI -
This antenna, a UML290, a 10 foot cable, and an adapter.

This antenna pulls in a reliable 4G LTE signal 6 miles away through trees. RSSI approx. -77dB. SINR approx. -23dB


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2016 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail