The SuperTITAN™ Tower series from Trylon bridges the cost between the lighter-weight TITAN™ towers and more costly custom-designed towers. By building in extra strength and the ability to provide P.E. stamped drawings the Trylon SuperTITAN can often take the place of high-cost custom-designed towers. The SuperTITAN is constructed of 10-ft knockdown sections for easy assembly and reduced shipping costs. All sections are also hot-dip galvanized for increased durability and superior corrosion protection. All towers under 100-ft include a 5-ft embedment section for use in a concrete foundation while the SuperTITAN series S800 through S1200 include base feet and tie-rods. All towers 100-ft and taller include base feet and tie-rods (exceptions include 100-ft S100-H300, 110-ft S100 and S200, 120-ft S100 which include a 5-ft embedment section). Listed wind loadings are EIA 222-F standard without ice ('-' indicates tower failure or information not available from manufacturer).
- Tower Series: S200
- Leg Type: Angle
- Leg Connection: Double-bolted splice plates
- Engineering: Pre-engineered
- Climbing Application: Step-bolts
- Tower Type: Self-Supporting
The 5.94.0200.050 SuperTITAN tower ships knocked-down and requires field assembly by an experienced tower professional. This kit includes all 10-ft sections, 5-ft embedment section for concrete, splice hardware and pipe anchor brackets for antenna mounting pipe. Tower sections included with this kit are as follows:
5.94.0022.000 Knocked-down top section #2.
5.94.0031.000 Knocked-down section #3
5.94.0041.000 Knocked-down section #4
5.94.0051.000 Knocked-down section #5
5.94.0061.000 Knocked-down section #6
Normal soil foundation designs are found below in the Attachments section. Geotechnical surveys are always recommended prior to any tower installation.