Solid Signal > Cell Phone Accessories > Cellular Antennas
Wilson Electronics 801365 Wireless 1900 MHz 65 dB Amplifier (801365)
Brand: Wilson Electronics
No Reviews Available
Be the first to write one!
The Wilson 801365 amplifier is designed to improve cell reception on the 1900 MHz frequency in large buildings, offices, and warehouses. When combined with antennas and cables to form a complete kit the Wilson Electronics 801365 Amplifier can cover areas up to 10,000 sq ft.
- Compatible with all networks operating at 1900 Mhz frequency
- Wireless connection requires no hardware to cell
- Supports multiple users at once
- Excellent for offices, warehouses, homes, and more
- Includes a Two-year Manufacturer Warranty from Date of Purchase
The outside antenna is placed in the area of
best signal, collects it and sends it through a cable to the amplifier. The
801165 amplifier boosts the signal, and then sends the boosted signal through a
cable to the inside antenna. This provides an area of improved signal that can
be used by up to 15 phones or data cards simultaneously. To work as a complete
kit, the Wilson 801365 amplifier needs to be combined with an external antenna,
internal antenna and coaxial cable.
The Wilson Cellular
Amplifier / Repeater has a better receiver than whats in your cellphone. Its
advanced electronics are very sensitive and able to receive small signals which
would go undetected by most cellphones. It also has a better transmitter with
double the power of your cellphone. This allows your voice to be heard by
distant cell sites, increasing coverage up to 50 miles or more.
Amplifier-Repeater greatly improves signal strength inside a building when
using your cellular phone. It does this without a physical connection to your
phone, allowing you to walk freely during a call. Because it is wireless
multiple cell phones can be used simultaneously.
is received by the outside antenna from the cell site. It is then amplified and
repeated to your phone through the inside antenna. When the phone transmits it
is received by the inside antenna. It is then amplified/repeated to the cell
site through the outside antenna.
Mount the Amplifier/Repeater on a
wall or ceiling.
Connect the Outside Antenna to the
Amplifier/Repeater side labeled Outside Antenna.
the Inside Antenna
Connect the Inside Antenna to the side
labeled Inside Antenna on the Amplifier/Repeater.
The Inside Antenna
should be centered in the weak signal area. The Inside Antenna should be at
least 7 feet from the ground.
Parts Required (Not
- Outdoor antenna: Magnet Mount
(301103), Roof Mount "Trucker" (301101) or Yagi (301111)
antenna: Magnet Mount (301103), Mini Magnet (301113) or Stealth (301106)
Coax Cable may be needed for some installations
- N-Male to FME-Male
Adapter (required when using 9913 Coax Cable)
|Part Number ||801105 ||801165
||801108 ||801110 ||801365 ||804005 ||804006 ||801506 ||801606 |
|Channel || || ||A ||B
|Gain (Rx/Tx) ||50 dB ||65
dB ||60 dB
||60 dB ||50 dB ||60 dB ||60 dB ||60 dB |
|Frequency ||824-835 MHz |
|835-849 MHz |
|1850-1990 MHz ||806-824 MHz |
|880-915 MHz |
|Max Output Power ||3 watts ||2
Figure ||3 dB
nominal ||4 dB
nominal ||3 dB
nominal ||3 dB
dB ||+/-2.5 dB ||+/-4 dB |
|Isolation ||>90 dB ||>90 dB |
||6 V DC, 3 A
VAC, 3 A max ||6 V
DC, 3 A |
ohms ||N-Female 50 ohms |
|Dimensions ||5.6 x 3.6 x 1.7 (inches) ||5.6 x 3.6 x 1.7 (inches)
|Weight ||1.5 lbs ||1.5 lbs |
You May Also Consider
Product Reviews for Wilson Electronics 801365 Wireless 1900 MHz 65 dB Amplifier (801365)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!