Solid Signal > TV Antennas & Supplies > Signal Splitters
The Wilson 859981 4 -Way signal splitter allows you to split the signal from an amplifier to up 4 internal antennas with negligible signal loss. The splitter is dual band/iDEN, and so will work with all the amplifiers on our site.
- Frequency 800MHz, 1900MHz, Dual Band, iDEN
- Impedance 50 ohm
- Connector Type N Female
- Signal Split Ratio Equal
- Loss Both ports -3dB
- Includes a Two-year Manufacturer Warranty from Date of Purchase
This 4-Way splitter allows you to drive three
interior antennas from a single amplifier/repeater. Because you are splitting
equally the signal each antenna will receive is 1/4 of the original signal.
This equates to about 50% of the coverage distance when compared to driving a
single antenna. You should use this splitter if the 4 areas you wish to cover
are approximately equal in area.
splitter has N Female connectors. Typically a 2ft cable is used to connect the
splitter to the amplifier. Any cable length can be used, but the total cable
length in the system should be kept to a minimum to minimize attenuation.
Lengths of coaxial cable can then connect the splitter to the internal
You May Also Consider
Product Reviews for Wilson Electronics 4-Way Wide Band Splitter (859981)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!