Availability: Usually Ships Same Day Condition:New
Your Price: $099
List Price: $1.99
The Serial ATA standard provides for the adoption of a new 15-pin drive power connector replacing the ubiquitous 4-pin Molex connector. However existing system cases and power supplies may have an insufficient number of SATA power connectors while still retaining the older Molex connectors.
This 8" adapter cable plugs into a 4-pin Molex power plug and provides a single 15-pin SATA power connector with a locking latch so that your connection does not come loose due to movement or vibration
While many SATA drives only require these power levels, some require the additional 3.3 VDC power provided for in the SATA specification
Make sure your drive does not require 3.3 VDC before purchasing this adapter cable
The Molex connector provides only 5 and 12 VDC power
68-pin Very High Density Cable Interconnect (VHDCI) connector active terminator
with LED indicator light. Terminators reduce interference on a system by preventing RF signals at the end of an open line from being reflected back. They are placed at ...
Model LA141Rx boosts cable and DBS signal levels offsetting the
loss of 150 feet of RG-6 while passing data modem and receiver control signals from the receiver to the switch. With PS12250 power adapter. Features. Universal coaxial amplifier. Works ...
SlimRun AV is an active optical cable system designed to
connect two HDMI-enabled devices with high performance, low power consumption, and low cost. Using optical fiber to replace copper wire as the high-speed signal transmission medium, SlimRun can perfectly ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).