RedMere technology is a breakthrough in the functionality and efficiency of HDMI cables. High Speed HDMI Cables with RedMere can reliably distribute High Speed signals to much greater distances up to 65 feet (20 meters) at the full 10.2 Gbps data throughput as opposed to the 25 foot distance for HDMI cables without RedMere technology. This can be done with thinner and lighter cables which are easier to handle and route through your home theater system and which put less stress on your equipment's HDMI ports.
Normally a cable of this length would be incapable of supporting the full 10.2 Gbps High Speed HDMI data rate even with 22 AWG conductors. However with the RedMere chip installed in this cable it fully supports all High Speed HDMI features with only 28 AWG conductors.
Note that HDMI Cables with RedMere are directional. One end must be connected to the source device (e.g. blu-ray player) and the other end to the sink/display (e.g. HDTV). Hooking them up backwards will not damage anything they just won't transmit a signal. Also note that these cables are fully compatible with switches splitters matrix devices etc. They can be used in any application in which a normal HDMI cable can be used and many applications where HDMI extenders would otherwise be required!
The CL2 rating on this cable indicates that its outer jacket has been designed to burn more slowly thereby making it safe for use inside or through the walls of residential classed buildings. The CL2 rating ensures that your cable installation complies with fire safety codes and insurance requirements.
TIP: It is a good idea to test cables and connections before installing them inside a wall. If there are any issues or problems we can help you resolve them before you spend the time effort and expense of installing them inside the walls.