The MKII Version of the Acutrac 22 Pro now features a metal case, replaceable F connectors and a detachable bottom so you can replace the battery without voiding the warranty
As seen in the DIRECTVs AT9 Installation Video
1 Year Warranty on Meter
Meter does not come with splitter
Ideal for alligning DIRECTVs SL3 and SL5 satellite dishes.
Look at two LNB bar graphs simultaneously
Satellite receiver can loop power through the meter if necessary
13 or 18 volt selection capability
Attenuation feature for heightened signal adjustment
Works with DIRECTV and Dish Network
Powered by internal 8.4 NiMH battery or from satellite recevier through coax cable. 30 minute operation on fully charged battery
Does not need the receiver to work
Kit comes with AcutracPRO, a 18V wall charger, a 12V vehicle cord power adapter/charger, and a protective neoprene case.
Input Frequency Range: 900-2200 MHz
Input Level: 20-100 dByV
Overload Protection: 600mA LNBF current draw limiter - meter will indicate "Over Current"
Works with DISH PRO and SUPERDISH satellite systems
The ACUTRAC22 Pro is designed to be an aid in aligning satellite antenna so they can provide maximum performance. Please be aware of the fact that there are numerous satellites which will cause the ACUTRAC22 Pro to respond with a signal reading. The installer must select the correct satellite(s) for alignment. The software provided with the satellite receiver can provide the elevation and azimuth of the satellite(s) if desired.
DIRECTV® PARA TODOS
Multi-Satellite installs: 101°, 110°, and 119°
DISH PRO and SUPERDISH
Easy to read LCD display
Self-contained rechargeable battery
Dual satellite signal
Selectable audio on/off tone measures receiver voltage
Measures individual LNBF current consumption
Switches 22 KHz on/off
Adjustable LCD contrast
13/18 volt switching