DIRECTV SWM-8 Single Wire Multi-Switch With Power Supply (8 Channel) (SWM-8)

The new SWM-8 allows installers to run an AT9 or AU9 DirecTV satellite antenna plus 2 Flex ports (72.5 & 95) down a single RG6 Coaxial cable! At the end of the single wire a SWS-2, SWS-4, or SWS-8 splitter is required (not included) to distribute the signal to as many as 4 DVRs or 8 HD receivers! Please Note the SWS series of splitters are specially designed for the SWM-8; you must have an SWS-2, SWS-4, or SWS-8.

The SWM Port Single Wire Solution is ONLY compatible with the H20, HR20 (Firmware .2042), H21, and HR21.

The three "Legacy" ports are compatible with all older Receivers, however, each single tuner receiver using the "Legacy" port requires a cable running directly to the SWM-8 unit. DVRs using the "Legacy" ports require 2 cables coming back to the SWM-8 unit.

           Features:

• Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners
• Provides two outputs to serve two customer dwellings (typical)
• Contains a built-in diplexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
• Provides AGC for the satellite input signal.
• Die-cast housing is suitable for both indoor and outdoor use.
• Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99/101, 103/110/119 satellites, plus two Flex Ports (95 sat and 72.5 sat)
• Uses only 1 RG6 between SWM-8 and STS Splitter (not included)
• Maximum Distance from SWM8 to Splitter: 200
• Power Supply Included
  
  SWM Port Compatible With:
• HR20-100 through HR20-700 w/ .2042 Firmware Update
• HR21-100 through HR21-700
• H20-100 through H20-700 w/ .2042 Firmware Update
• H21-100 through H21-700
• R16-100 through R16-700
• D12-100 through D12-700
• D13-100 through D13-100
  
  Specifications:
• Satellite Input Frequency Range: 250 - 2150Mhz
• Terrestrial & SMATV Input Frequency Range: 54 - 806Mhz
• Return Path Input Frequency Range: 5 - 40 (CMTS return path must use 33-40 MHz band)
• Number of Input Ports: 6 Satellite & 1 Terrestrial /SMATV
• Input Signal Power Level: dBm -45 to -15 dBm per transponder
• Output Frequency Range: MHz 950 - 2150 (Satellite) & 54 - 806 (Terrestrial & SMATV)
• SWM Channel frequencies: MHz 950 - 1800 (Channels 1-9)
• Satellite SWM Module Output Ports: 6 per SWM Module
• Terr/SMATV/Return SWM Module Output Ports: 1 per SWM Module
• Output Signal Power Level dBm -31 dBm (min) per SWM channel
• DC Power: Power Supply (29Vdc, 1.5A)
• Ground Stud: 1
• Dimensions: LxWxH mm 167x145x35
• Weight: kg 0.5
• Operating temperature range: C -34 to +52
   

DIRECTV SWM Line LNB Installation Video 2 of 2