|
Shop |
| TV Antennas & Supplies |
| Satellite Equipment |
| Mobile Equipment |
| Installation Tools |
| Wire & Cables |
| Commercial Equipment |
| LCD & Plasma Supplies |
| Video Surveillance |
| Automotive & Marine |
| Gamer Zone |
| Personal Audio/Video |
| GPS Navigation |
| Data & Networking |
| Sirius-XM Satellite Radio |
|
|
|
| Saturday, November 21, 2009 |
|
 |
| |
|
|
|
|
|
DIRECTV SWM5-KIT Single Wire Multi-Switch With Power Supply (5 Channel) (SWM5-KIT) |
|
|
| Five channel Single Wire Multi-switch (SWM). Allows any transponder from any satellite input to be independently selected and distributed via one of five designated SWM output frequency channels. |
|
|
|
| Availability: Currently Not Available |
|
|
|
Our Price: $179.99
|
|
|
|
|
|
|
|
|
|
|
|
Product Features |
|
Die-cast housing is suitable for both indoor and outdoor use
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99°/101°, 103°/110°/119° satellites, plus two Flex Ports (95º sat and 72.5º sat)
Compatiable with HR21 HD DVR Receivers, H21 HD Receiver, and H20 w/.2042 Firmware Update
Power Supply Included
Provides 6 independent channels for supporting up to 5 DIRECTV satellite tuners
Provides two outputs to serve two customer dwellings (typical)
Provides AGC for the satellite input signal
|
|
|
| Customers who purchased this item also considered |
|
DIRECTV SWM-8 Single Wire Multi-Switch (8 Channel) (SWM-8)DIRECTV SWM-PI 29V 1.5A Power Inserter for SWM-8 (SWM-PI)Zinwell WB616 DIRECTV Wide Band 6x16 Multi-Switch (WB616)
|
 |
|
Additional Information |
|
The new SWM-5 allows installers to run an AT9 or AU9 DirecTV satellite antenna plus 2 Flex ports (72.5 & 95) down a single RG6 Coaxial cable! At the end of the single wire a SWS-2, SWS-4, or SWS-8 splitter is required (not included) to distribute the signal to as many as 5 HD receivers! (DVRS require 2 lines each) Please Note the SWS series of splitters are specially designed for the SWM-5; you must have an SWS-2, SWS-4, or SWS-8.
The SWM Port Single Wire Solution is ONLY compatible with the H20, HR20 (Firmware .2042), H21, and HR21. The three "Legacy" ports are compatible with all older Receivers, however, each single tuner receiver using the "Legacy" port requires a cable running directly to the SWM-5 unit. DVRs using the "Legacy" ports require 2 cables coming back to the SWM-5 unit.
Features:
- Provides five (5) independent channels for supporting up to 5 DIRECTV satellite tuners
- Provides two outputs to serve two customer dwellings (typical)
- Provides AGC for the satellite input signal.
- Die-cast housing is suitable for both indoor and outdoor use.
- Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99/101, 103/110/119 satellites, plus two Flex Ports (95 sat and 72.5 sat)
- Uses only 1 RG6 between SWM-5 and STS Splitter (not included)
- Maximum Distance from SWM5 to Splitter: 200
- Power Supply Included
SWM Port Compatible With:
- HR21 HD DVR Receivers
- H21 HD Receiver
- HR20 w/ .2042 Firmware Update
- H20 w/ .2042 Firmware Update
Specifications:
- Satellite Input Frequency Range: 250 - 2150Mhz
- Terrestrial & SMATV Input Frequency Range: 54 - 806Mhz
- Return Path Input Frequency Range: 5 - 40 (CMTS return path must use 33-40 MHz band)
- Number of Input Ports: 6 Satellite & 1 Terrestrial /SMATV
- Input Signal Power Level: dBm -45 to -15 dBm per transponder
- Output Frequency Range: MHz 950 - 2150 (Satellite) & 54 - 806 (Terrestrial & SMATV)
- SWM Channel frequencies: MHz 950 - 1800 (Channels 1-9)
- Satellite SWM Module Output Ports: 6 per SWM Module
- Terr/SMATV/Return SWM Module Output Ports: 1 per SWM Module
- Output Signal Power Level dBm -31 dBm (min) per SWM channel
- DC Power: Power Supply (24Vdc, 2.1A)
- Ground Stud: 1
- Weight: kg 0.5
- Operating temperature range: C -34 to +52
|
|
|
|
Back to Top |
|
|
|
|