Availability: Usually Ships Same Day Limited Stock. Order Now! Condition:New
Your Price: $52999
List Price: $699.99
The Aim meter is a DIRECTV Specific satellite installation meter, that tunes to ANY DIRECTV Transponder - national and local spot beams. Powers all LNBS including SL3 SWM and SL5 SWM.
Measure cable resistance, in-line current, voltage, 22 kHz tone and DiSEqC essages
Easy to read display and keypad
Tune to ANY DIRECTV transponder - National and local spot beams
Powers ALL LNBS including SL3 SWM and SL5 SWM
USB port for transferring data to a flash drive and for updating firmware
EIV can be used to troubleshoot and pinpoint problems anywhere within a distribution network
Several additional features can be used to quickly identify faulty equipment in an installation
Test individual cable runs, tuning to any DIRECTV Satellite transponder, testing communications between SWiM and IRD, measuring in-line voltage, current and tone, and performing a complete transponder survey
Includes: Carrying case, 100 to 240 VAC Power Adapter, 12 VAC vehicle power adapter, battery pack, F-connector, 25 cable test load, 512 MB USB flash drive (contains User Manual)
Newest Version of AIM Meter! We Are an Authorized DIRECTV AIM Meter Dealer
AIM signal meters will only be shipped to the customers billing address used when placing the order. We will not ship to third party location.
On-screen instructions guide technician through installation, EIV and troubleshooting
Efficient, Rugged, and Versatile
The AIM Was developed by DIRECTV, Trilithic and Indesign to provide customized features for installing and troubleshooting DIRECTV Satellite receiver systems. The AIM is a rugged meter suitable for both indoor and outdoor use. A fully charged AIM can be use for all aspects of installation and troubleshooting as many as six single-family homes.
The AIMs large display and keypad make it easy to navigate to the many features of the meter. On-screen directions guide the technician through ODU installation, extended installation verification, and other troubleshooting tests. A USB port is providedto transfer data from the AIM to a flash drive, and for upgrading the AIM firmware.
Extended Installation Verification (EIV) EIV can be performed right after ODU alignment whiel the technician is on the roof to uickly confirm that pointing is satisfactory. This gives the installer confidence that IRDs isntalledi n the home will pass IV. EIV can also be used as troubleshooting tool to pinpoint problems anywhere within a distribution network.
Troubleshooting Several additiona troubleshooting features can be used to quickly identify fault equipment in an installation. the AIM Allows testing of individual cable runs in the distribution network, tuning to any DIRECTV satellite transponder, testing communications between the SWiM and the IRD, measuring in-line voltage, curretn and tone, and performing a complete transponder survey.
Signal Level Range
-10 to -69 dBm
RF Input Connector
Replaceable F Connector (2)
LNB Power Supply
13 Volts/ 18 Volts
SWiM LNB Power Supply
USB flash drive
8 - cel, 9.6 Volts, 3.8 AH rechargeable NiMH
-20° to + 125°F (-28.9° to + 51.7° C)
-40° to + 150° F (4.4° to 37.8° C)
Battery Charging Temp.
40° to 100° F (4.4° to 37.8° C)
240 x 160 pixel, transflective backlit LCD
2.54 lbs. (1150 g)
244 x 118 x 59 mm 9.6 x 4.6 x 2.3 in.
Here are available downloads related to this product:
Product Reviews for AIM Advanced Installation Signal Meter for DIRECTV Satellite Dishes (AIM)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (4 reviews):
Recent Review: Matt - Buffalo, NY - 3/2/2015 Great product! Makes aiming DirecTV easy and results in signal through tough weather conditions.
Great product! Makes aiming DirecTV easy and results in signal through tough weather conditions. Matt - Buffalo, NY - 3/2/2015 6:55:42 PM Aiming straightforward, follow the guide right on the meter. You should be able to get 100 signal on 101 and 95+ on 119. Then the rest (99+103) should fall in place. For any updates, go to these websites for a free no-registration needed download. https://www.satinstalltraining.com/meter.html and/OR https://www2.satinstalltraining.com/ Latest at time of writing is 2.6 v0032.
yeah finaly ary - ny, ny - 3/28/2013 no more time to spend in that roof my aim meter help me back my lader on my truck..
Aligned my Slimline-5S (SWiM) in 5 min! Warren - Fairport, rt NY - 5/9/2011 Cost effective making fast easy and accurate installs.Self powered no external power required for the meter and dish.
Re: Firmware Richard - North Carolina, North Carolina - 5/31/2012 Great meter... the only downside is you need to be a Dealer or DirecTV installer to download firmware updates.
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).