MICM series of products are fixed-channel analog audio/video modulators. The MICM-45D Is available in NTSC channels 2-125 (54-806 MHz). This 5th generation of the MICM series, equipped with the CALMTones feature, utilizes an Audio AGC (Automatic Gain Control) solution that eliminates variations in loudness level that may be present among various program sources.
• Prohibits commercials that accompany broadcast programs from: (i) having modulation levels substantially higher than the broadcast program; and (ii) having an average maximum loudness substantially higher than that of the broadcast program.
Provides consistent audio level among all broadcast programs on different channels and among different programs within the same channel
Compact design allows for deployment of 12 channels in 2RU
Utilizes SAW filters for improved performance
Die-cast chassis for RFI immunity
Integrated Stereo encoder
Video Connector: “F” Female Impedance: 75 Ω Return Loss: 20 dB Input Level: 1.0 volt Peak-to-Peak (87.5% depth of modulation) Frequency Response: 1.0 dB Peak-to-Valley (fv to fv+4.2 MHz) Peak to Peak Video-to-RMS Hum Ratio: 64 dB Signal-to-Noise Ratio: 65 dB (Weighted; 4 MHz bandwidth) Differential Gain: 2.0% (87.5% depth of modulation) Differential Phase: 2.0 degree (87.5% depth of modulation) Chrominance/Luminance Delay: Per FCC Requirements
Mono Audio(standard) Connector: RCA Input Impedance: Greater than 10 kΩ, unbalanced Input Level:(for 25 kHz deviation) 0.5 to 4.0 volt peak-to-peak (constant AGC range) Frequency Range: 50 Hz to 12 kHz Frequency Response: ± 0.5 dB Total Harmonic Distortion: 1% @ 25 kHz deviation Signal-to-Noise Ratio: 70 dB
Stereo Audio (optional) Connector: RCA Input Impedance: Greater than 10 kΩ, unbalanced Input Sensitivity:(for 55 kHz peak deviation) 0.5 to 4.0 volt peak-to-peak (AGC Range with pilot tone) Frequency Response: +/- 0.75 dB (50 Hz to 12 kHz) Separation: 20 dB @ 50 Hz to 10 kHz
OUTPUT Connector: “F” Female Impedance: 75 Ω Return Loss: 15 dB Frequency Range: 54 to 806 MHz (NTSC CATV Ch. 2 -125) Power Level: +45 dBmV Power Level Range: 10 dB continuously adjustable Carrier-to-Noise: (In Channel) 63 dB Broadband Noise: -90 dBc (@ +45 dBmV output level, 4 MHz band.) Spurious Outputs: -66 dBc Aural/Visual Carrier Ratio: -11 to -19 dB continuously adjustable 4.5 MHz Aural Inter-carrier Freq. Tolerance: ±250 Hz; 32 to 122 °F (0 to 50 °C) Standard Channels: ±10 kHz; 32 to 122 °F (0 to 50 °C) FCC Aeronautical Channels: ±5 kHz; 32 to 122 °F (0 to 50 °C)
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).