The Sabre S3A Series LDA pre-engineered self-supporting tower will change the way you think about pre-engineered towers. The LDA is simple-to-erect and strong enough to handle even the most demanding loads. And with seven different series from which to choose, there's sure to be an LDA model to suit your project needs. The S3A Series LDA towers are available in heights from 20 to 150-ft. All towers are designed per ANSI/TIA/EIA-222-G-2005. The LDA is a three-legged self-supporting tower constructed of all-angle knock-down leg and bracing sections. All steel parts are hot-dip galvanized to ensure uncompromising integrity in even the most severe climates. The effects of torsion have not been considered in the EPA values shown. These EPA values are correct for symmetrically loaded instances where torque is not present (such as one top mounted antenna at the center of the tower, or three leg mounted panel antennas symmetrically mounted around the tower). Should torque be present, the allowable EPA value shown will be reduced and in some cases this reduction may be significant.
- Tower Height: 90 ft
- Tower Series: Series 7
- Leg Type: Angle
- Leg Connection: Bolted splice plates
- Engineering: Pre-engineered
- Climbing Application: Step bolts
- Tower Type: Self-Supporting
The C05-109-709 tower kit includes the main tower hardware only and consists of the tower legs, diagonals, splice plates, and connection hardware. This tower is designed for use with an anchor bolt type foundation.