Solid Signal > Cell Phone Accessories > Signal Boosters


Cellphone-Mate CM-TRIFLEX-V KIT for 3G  Verizon 4G LTE (CMTRIFLEX-VKIT)
Cellphone-Mate CM-TRIFLEX-V KIT for 3G  Verizon 4G LTE (CMTRIFLEX-VKIT)

Click Images to Enlarge

Cellphone-Mate CM-TRIFLEX-V KIT for 3G Verizon 4G LTE (CMTRIFLEX-VKIT)

Brand: SureCall           P\N: CM-TRIFLEX-VKIT          

5 Star Reviews!       Read Reviews (1)      Write a Review
Availability: Discontinued

Looking for something similar? Please contact us at info@solidsignal.com or call us at 877-312-4547 for recommendation.


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Solid Signal is an Authorized Reseller of SureCall products.
Solid Signal is an Authorized Reseller of SureCall products.
The SureCall Tri-Flex-V Signal Booster Kit by Cellphone-Mate is a wireless signal booster that can amplify the 2G and 3G networks from most major carriers plus the Verizon 4G LTE network. Until now, most signal boosters were either dual-band and only boosted 3G and earlier signals or they were LTE specific and only boosted the LTE signal. This amplifier combines the two and boosts both the dual-band and Verizon LTE frequencies. The SureCall Tri-Flex repeater features a powerful 65 dB gain which gives it a total coverage area of up to 5,000 sq ft (depending on existing outside signal strength) when paired with the included omnidirectional antenna making this the ideal amplifier for large homes and small to medium offices. Because this is a powerful amplifier, you must have a minimum of 20 ft of vertical separation between the inside and outside antennas. Adding up to 75 feet of horizontal separation can help improve the performance of this signal booster by minimizing the potential for oscillation (feedback) between the inside and outside antennas.

Features


Specs


Max Coverage Area: Up to 5,000 sq ft
Frequency: 700MHz, 800MHz, 1900MHz
Specific Frequency (Up/Down): 698 - 716 MHz / 728 - 746 MHz, 824 - 849 MHz / 869 - 894 MHz, 1850 - 1910 MHz / 1930 - 1990 MHz
Gain (Up/Down): 65dB / 65dB
Impedance: 50 ohm
Product Manual: Tri-Flex User Guide
Product Specifications: No
Power Requirements: Input AC110V,60Hz; Output DC 6-12V; <30W

KIT INCLUDES
1.  CM-TRIFLEX-V Amplifier with power supply
2.  CM288W Outdoor Antenna
3.  CM222W Indoor Antenna
4.  CM001-30 30ft Coax Cable
5.  CM001-75 75ft Coax Cable


Discuss










Product Reviews for Cellphone-Mate CM-TRIFLEX-V KIT for 3G Verizon 4G LTE (CMTRIFLEX-VKIT)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!

Average Review (1 reviews):5 Star Reviews!

Five Stars:
 1 (100%)
Four Stars:
 0 (0%)
Three Stars:
 0 (0%)
Two Stars:
 0 (0%)
One Star:
 0 (0%)
Recent Review:
Jenny - Louisa, VA - 7/13/2013
Absolutely AMAZING ... there IS help for people in marginal cell reception areas!



Customer Reviews:
Filter:
Absolutely AMAZING ... there IS help for people in marginal cell reception areas!
- Louisa, VA -
For 1 1/2 years, I struggled with almost no cell reception in this house, in a "marginal" 3G area and a Verizon MiFi 2200 providing my only available internet access. Then, I installed some 3G Wilson equipment (antennas and amplifier). Helped a lot, but was struck by lightning a couple weeks ago. Since 4G had arrived not too far away, and I picked it up occasionally, I decided to replace my "fried" equipment with this 3G/4G Triflex-V equipment. Just hooked it up and I';m AMAZED! Without amplification and antenna equipment, I was lucky to get .3-.5 mbs, here in the woods. Now, I have 4 bars on 4G, running 6-11 mbs!!! Progress, yes?!!! BTW, this is significantly better than the 3G Wilson DB Pro setup that I had, which gave me 2-5 mbs. Oh, and I saved about $40/month by giving up my Verizon MiFi and using my smartphone as a hotspot.

For those of you struggling with cell reception, especially in tall woods, note that I did invest in a 30'; pole (3 10'; sections, joined with couplers. I did not just rely on the set screws in the couplers, but drilled holes thru the couplers and into the pole sections to make it more stable. The pole is set into the ground, then mounted to the side of the house, just under the eaves. Much easier than trying to install the pole on a high-pitch roof ... drilling holes in the roof that could potentially cause a leak. And, more stable.

The tech support people at SolidSignal were very helpful, could answer questions and give advice that the sales people couldn';t.

Only 2 complaints/surprises: (1) This antenna does not include a pole mount; I had to get inventive to mount to my pole. (2) I thought this kit included a directional panel antenna for inside (as in the same kit from another vendor). This has a dome (ceiling mount) repeater antenna, but I can deal with that considering the good results. And, the fact that this kit price was several hundred dollars less than the other vendor.

Last bit of advice ... consider a ground rod, and/or an in-line lightning protection unit! But do note that this equipment wasn';t what attracted the lightning strike ... it actually hit a tree on the other side of my house, went thru the roots and under my house ... fried 2 flatscreen TVs, my pool equipment, and the cell equipment.


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2016 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail