Solid Signal > Commercial Equipment > Interdiction


Blonder Tongue Digital and High Definition Processor Upconverter (DCDH-UV)

Click Images to Enlarge

Blonder Tongue Digital and High Definition Processor Upconverter (DCDH-UV)

Brand: Blonder Tongue           P\N: DHDC-UV          

No Reviews Available  Be the first to write one!


Availability: Usually Ships Same Day
Condition: New


Your Price: $35899


List Price: $448.99




Qty:


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Solid Signal is an Authorized Reseller of Blonder Tongue products.
Solid Signal is an Authorized Reseller of Blonder Tongue products.
The DHDP Series is a two-unit system consisting of a Downconverter unit which acts as the input section and an Upconverter unit which acts as the output section. Both units are housed in a single MICM style die-cast chassis and are available in both horizontal and vertical versions.

Specs


The DHDP series is a two-part system that receives any high definition or digital signal and processes it to any available 6 MHz channel in the 54-806 MHz frequency range. The unit does not modify any of the data stream information throughout the process guaranteeing compatibility with many consumer decoders. Achieving the highest level of signal purity, the DHDP features triple SAW filtering that results in extremely high adjacent channel rejection. Plus, advanced AGC circuitry ensures consistent output signal fidelity. All modules are housed in Blonder Tongue’s advanced die-cast micro housing and compatible with standard micro-modulator racks & power supplies.

With DHDP Series Converters, an operator uses an off-air antenna to receive the digital & high definition programming from local broadcast sources. These signals, currently found in the UHF band, are transmitted in 8 Vestigial Side Band (8 VSB) format. The 8 VSB signal is received by the DHDC-D, converted to IF and then fed to the DHDC-U. The DHDC-U then upconverts the signal to any available channel, including on-channel if desired, for distribution on the existing cable system. The signal can then be viewed at the customers’ homes with any HDTV-capable television or a standard television with an external HDTV receiver.

Specifications

DOWNCOVERTER
RF

Input Frequency Range: (8VSB)
VHF 2-13: 54-216
UHF 14-69: 470-806
UHF Extended: 806-860
Operating Input Range: -10 dbmV to +20 dBmV
Input Level Range:
(AGC Controlled) -20 dBmV to +25 dBmV
Adj. Ch. Rejection: (Ref. to +30 dBmV IF output)
Adj. Aural and Below: >65 dB
Adj. Visual and Above: >65 dB
Output Frequency: 44.00 MHz IF
Output Level: +30dBmV (-20 dBmV to
+25dBmV Input)
L.O. Leakage on RF Input Port: -50 dBmV
Phase Noise: @ 10 KHz Offset -85 dBc/Hz
General
Power Requirements:
+12 VDC: 120 mA
+5 VDC: 160 mA
Operating Temperature Range: 0 to +50 ºC
Mechanical
Dimensions (W x H x D):
1.15 x 3.5 x 7.5 in.
29 x 89 x 101 mm
Weight: 0.8 lbs (.36 kg)
Connectors (Rear Panel):
RF Input: "F" Type, Female
IF Output : "F" Type, Female
Power: 3 Pin Polarized Receptacle
Controls (Front Panel):
Channel Selection: 2 Digit Push Button
Channel Enter: Push Button
Indicators (Front Panel):
Power ON/Status OK: 2 color LED/Green
Status (Error): 2 color LED/ Red

UPCONVERTER
RF

Output Frequency Range: 54-860 MHz
Channels: CATV- STD, IRC, HRC Broadcast;
VHF, UHF
Output Frequency Tolerance: ±5 KHz
Output Level:
Analog: +45 dBmV (IF Input +35 dBmV)
Digital: +40 dBmV (IF Input +30dBmV)
Output Level Adj. Range: 10 dB
Channel Flatness: 1 dB
Spurious Output 50-1000 MHz: -60 dB
C/N Ratio IN Channel:
Digital: -60 dB, (6 MHz BW +40 dBmV Output)
Analog: -65 dB, (4 MHz BW +45 dBmV Output)
Broadband Noise: -76 dBc
(4 MHz BW +45 dBmV Output)
Phase Noise:
@ 10 KHz Offset -88 dBc
@ 20 KHz Offset -98 dBc
Output Impedance: 75
Output Return Loss: 12 dB
General
Power Requirements:
+12 VDC: 140 mA
+5 VDC: 300 mA
Power: 3.2 W
Operating Temperature Range: 0 to +50 ºC
Mechanical
Dimensions (W x H x D):
1.15 x 3.5 x 7.5 in.
29 x 89 x 101 mm
Weight: 0.8 lbs (.36 kg)
Connectors (Rear Panel):
IF Input: "F" Type, Female
RF Output : "F" Type, Female
Controls (Front Panel):
Channel Selection: 2 Digit Push Button
Channel Enter: Push Button
RF Output Level: Control
Indicators (Front Panel):
Power ON/ Status OK: 2 Color LED/Green
Status/ Error: 2 Color LED/Red

The Downconverter unit is designed to accept any 8VSB signal from 54-860 MHz. Channel entry is made using a 2 digit front pane l accessible BCD switch. (I.E. - VHF 2-13, UHF 14-69 & unused spectrum 806-860 MHz). The Downconverter outputs an IF signal which is fed to the Upconverter unit.

The Upconverter unit is designed to take the IF signal from the downconverter and process it to any channel from 54-860 MHz. Channel entry is made using a 2 digit front panel accessible BCD switch. (I.E. - CATV – STD, IRC & HRC as well as Broadcast VHF & UHF

Downloads


Here are available downloads related to this product:



Discuss





RELATED SEARCHES







Product Reviews for Blonder Tongue Digital and High Definition Processor Upconverter (DCDH-UV)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



  RELATED PRODUCTS
Related Products
The DUC864 upconverter is designed specifically to upconvert a 44 ...
MyGica ATV 586 ATSC is the Ultimate Entertainment TV Box ...


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2016 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail