Availability: Usually Ships Same Day Condition:New
Your Price: $33399
List Price: $484.99
You dont need to spend thousands on a spectrum analyzer just to get accurate TV antenna measurements! The revolutionary DIGIAIR-PRO signal meter for HD TV antenna signals offers you professional-level measuring tools on a hobbyist budget. Its simple enough for a first-timer yet powerful enough for the most experienced RF engineer.
Trying to locate the most TV antenna channels available in your area? Get the results you need quickly. Fine-tune your antenna performance and start watching free TV!
Perfect for digital terrestrial installations (ATSC)
Unit no longer comes with the serial adapter
Please note: The manufacturer ships this unit with 7 batteries in place, and a loose battery in the box. They do this to eliminate the possiblility of the unit actually draining all the batteries and render it useless.
Built in, rechargeable battery
Power supply and car-charger enclosed
Powered by Emitor
Developed for exact adjustment and alignment of terrestrial antennas (off-air)
LCD display for signal strength in form of thermometer scales and number 0-99
Shows a single channel or six channels at the same time. You can view signal in spectrum mode.
You can feed voltage (5 Volt) to external active-amplified antennas. Short-circuit protection by automatic fuse.
Meter does not come with splitter
Use for easy terrestrial installations
Handy spectrum-analyzer for frequency 45-862MHz
Shows complete spectrum in one picture
Built in beeper (pitch tone) and maxhold function
High resolution LCD-display
Easy digital readout of BER and SNR
Ready for Mpeg2 and Mpeg4 signals
Analog signal level reads out in dBuV
Presents one channel readout with high resolution or six channels simultaneously or the complete spectrum
Very sensitive, easy to maximize weak and strong signals
Built in beeper (pitch tone) and maxhold function
Aerial power output, 0V, 5V, 12V and 24V
The DIGIAIR Pro ATSC is the perfect spectrum analyzer for outdoor and indoor use. Its easy-to-use design and rugged case make it the right choice for going up on the roof to tweak an antenna. Professionals will appreciate the combination of features and hobbyists will see the value and low price!
DIGIAIR PRO Features
Input Frequency: 47-862MHz
Input Level: 25-100dBuV
Input Impedance: 75 Ohm, F-connectors
Short-Circuit Protection: Automatic fuse on antenna input
Indications: Antenna voltage 5V on/off
Power Supply: External DC Power supply 12-18V (Center-pin+)
Power Consumption: Ca 230 mA
Display: 128x64 Pixels (LCD)
Battery: 600 mAh 8.4 V
Weight: 0.3 Kg, 0.66 lbs
Dimensions: 1234 x 55 x 35 mm
Includes Carrying Case, Power Supply, and Car Charger
Signal presentation on LCD screen display in form of thermometer-scales. Spectrum display or three digit number. Pitch tone indication on built-in loudspeaker.
Signal Level Readout
Thermometer scales showing maxhold & current signal level. Three digit number showing highest value when measuring on a single channel. Highest tone on loudspeaker. Max-hold function.
Signal strength is presented on the LCD-display. In analog mode it shows a single channel or six channels at the same time. You can also choose to view the signal in spectrum mode. In digital mode it displays the BER (bit error rate) and SNR (signal/ noice ratio). Readout of UCB (uncorrected bits) and CB (corrected blocks) is also easy to do. Furtermore DIGIAIR Pro present pitchtones (the higher tone the stronger signal) on a loudspeaker. DIGIAIR Pro is very sensitive and can detect even the weakest signals.
DIGIAIR Pro can feed Voltage (5/12 Volt) to external active antennas this feature is short-circuit protected by an automatic fuse. DIGIAIR Pro is charged via an external DC power-source of 13,5 -18 volt. Even though the DIGIAIR Pro has a lot of functions it is still very easy to use and has a very compact design. DIGIAIR Pro operates with 8xAA rechargeable batteries. The unit will works for at least 2 hours with fully charged batteries.
1 Year Warranty on Meter 6 Month Warranty on Batteries
Product Reviews for Solid Signal Digiair Pro ATSC TV Antenna Signal Meter Spectrum Analyzer (DIGIAIR-PRO-ATSC)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (1 reviews):
Recent Review: kennylive - Darien, IL - 11/8/2014 Perfect for digital antenna aiming, plus some CATV functions!
Perfect for digital antenna aiming, plus some CATV functions! kennylive - Darien, IL - 11/8/2014 5:45:15 PM This is just the tool I needed for antenna installations, and for under 4 figures! All functions are as described, with the ';bit error rate'; being very useful. There were some pleasant suprises: ';full spectrum mode'; includes FM, and the abliity to ';zoom'; in on a single channel; also it';s possible to switch to a cable tv channel map, there is nothing in the description that mentions that. It does not have the full functions of the DIGIAIR-PRO-CATV, but it';s still useful for basic troubleshooting. The only flaw I can find is the carrying strap; it';s only looped through the rubber case, and the rubber started to tear immediately.
Televes H30 CATV Meter/Analyzer with Remote Control (593101)
The H30 Series is a lightweight hand-held unit, packed with
all the features needed to install and troubleshoot DOCSIS 3.0 networks and television system using QAM digital modulation as well as NTSC analog signals.. This handy little meter is ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).