The IRIC is 3.5 mm mono “mini” plugs interconnect cable that is used for IR connections between ELAN multi-room controller IR output ports and any source that has a 3.5 mm IR input jack. Also perfect for routing the trigger outputs of ELAN multi-room controllers to ELAN amplifiers, Z•Fans and the Z•Power Controller. Note: The IRIC IR Interconnect Cable cannot be used w/the IRD4 Amplified IR Distribution block. For connecting the IRD4 to any ELAN IR output, use the 3.5 mm quad-to-mono interconnect cable incl. with the IRD4.
Plug-and-play cable for direct IR jack connections between components
3.5 mm plug-to-3.5 mm plug, 2 m length
Not for use with the IRD4 Amplified Distribution Block
Designed to mount flush in a cabinet or wall, the
IRS3’s and IRS4’s small footprint and low profile bezel make it an ideal choice wherever an inconspicuous IR Sensor is needed. The 3.5 mm Quad “mini” plug on the ...
Elan ELAN1005 Passive IR Connection Block (ELAN1005)
For basic IR repeating systems, this one-input by two-output Passive
IR Connection Block provides a quick and easy means for connecting an ELAN IR Sensor and two IR Emitters. Current-sharing resistors at each emitter jack allow any combination of ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).