Solid Signal > Commercial Equipment > IR Emitters


Element Hz ELE9191IR HDMI IR Control Kit (3D Ready) (ELE9191IR)

Click Images to Enlarge

Element Hz ELE9191IR HDMI IR Control Kit (3D Ready) (ELE9191IR)

Brand: ElementHz           P\N: ELE9191IR          

No Reviews Available  Be the first to write one!


Availability: Currently Not Available

Looking for something similar? Please contact us at info@solidsignal.com or call us at 877-312-4547 for recommendation.


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


ElementHz The ELE9191IR is the perfect balance of beauty and performance. This HDMI IR Control Kit from our Element-Hz™ line extends the signal from your remote controls (for Blu-Rays, DVRs, set-top boxes, etc.) by sending the remote controls IR signal over your HDTVs existing HDMI cable. This device is easy to install, and most importantly, it keeps your install clean and organized.

Features


  • HDMI Female to Male Adapter

  • HDCP 1.2 Compliant

  • Single Band, works with all single band infrared devices only

  • Will NOT work with dual band devices (most cable boxes are dual band, contact your cable boxs manufacturer to find out)

  • With IR plug

  • 33khz - 43khz Band (Single Band Emitter)

  • 480i, 480p, 720p, 1080i, 1080p

  • Gold Plated

  • Accurate and reliable reproduction of digital video signal, with no signal attenuation or distortion

  • Plug-and-Play

Specs


The ELE9191IR is the perfect balance of beauty and performance. This HDMI IR Control Kit from our Element-Hz™ line extends the signal from your remote controls (for Blu-Rays, DVRs, set-top boxes, etc.) by sending the remote controls IR signal over your HDTVs existing HDMI cable. This device is easy to install, and most importantly, it keeps your install clean and organized.

Everything You Need

With the ELE9191IR, there is no need to install additional cabling; you can use your existing HDMI cable. It’s compatible with any HDMI equipped device!

For the Installer, By the Installer

This IR Control Kit takes out all the guess-work. It’s simple to install and it’s, without a doubt, the most reliable device of its kind on the market… Here’s how it works:

The ELE9191IR uses the CEC channel of your existing HDMI cable run to send the IR signal through. When the signal from your remote control hits the IR sensor (included), the signal travels into the transmitter unit and is injected into your HDMI cable. On the other end of the cable, the receiver unit picks up the signal and outputs it through the included IR emitter which is facing your video equipments IR sensor. Rest assured that this kit will give you perfect control of your video devices every time!

Note: The CEC channel is used only for certain HDTVs that can send control commands to your video sources. If you use CEC, you dont need to extend your remote controls. This device has a switch that allows you to choose between IR injection and CEC channel-use.


Quick & Simple Install

This easy 4-piece solution only takes a minute to install! Here’s how to do it:

1) Simply connect the transmitting unit (target sensor) directly into your displays HDMI port.
2) Reconnect your displays HDMI cable into the transmitting units female HDMI port.
3) The transmitting unit has a port that accepts the included IR sensor which will receive any and all brands of remote control signals. Place this included sensor somewhere near, or on, the display where you will be aiming all of your remote controls. And as an added feature, a sticky adhesive is included on the underside of the sensor, allowing you to discretely place the transmitting unit directly on, or near, your display.
4) Now plug the receiver unit directly into your video sources HDMI port. The receiver unit has a port for the included IR emitter which you point at your video sources remote control sensor. (The emitter also features an adhesive for discrete placement)


Discuss





RELATED SEARCHES







Product Reviews for Element Hz ELE9191IR HDMI IR Control Kit (3D Ready) (ELE9191IR)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



  RELATED PRODUCTS
Related Products
Perfect for any surface, this ELAN IR Kit features (1) ...
Linear Z-Wave White Z way wall dimmer switch can fit ...
This ELAN IR Kit features (1) ELAN IRS8EP Extreme Plasma ...


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2016 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail