The Gefen HDMI over RGB Extender is a handy dongle extension solution which takes an HDMI signal and extends it far away over legacy 4- or 5-connector coaxial cabling.
Connects HDMI sources to remote HDMI displays over legacy RGBHV cabling
CEC Protocol Pass Through
Supports extension distances of up to 330 feet
Supports resolutions up to 1080p, 2K, and 1920 x 1200
HDMI and HDCP compliant
Extends any IR device
Lip-Sync Pass Through
340 MHz (up to 16 bit YUV 444 supported @ 1080p)
Deep Color Supported (XV Color Supported)
Dolby TrueHD & DTS Master Supported
The Gefen HDMI over RGB Extender is a handy
dongle extension solution which takes an HDMI signal and extends it far away
over legacy 4- or 5-connector coaxial cabling. The HDMI over RGB Extender
employes Gennums ActiveConnect technology and is capable of delivering 1080p
HDMI at distances up to 100m (330 feet).
This is the ideal
system for existing installations that are using RGBHV wiring and would like to
step up to a digital signal but not rip into the walls to rewire the
installation. How it works Simply
connect one end of the supplied HDMI cable to your HDMI video source. Connect
the other end of the supplied HDMI cable to the input side of the HDMI over RGB
Sender unit. Connect the HDMI over RGB Sender to the sending end of your 4- or
5-plug coaxial cable run. If you have a 4-cable configuration, use the included
power supply with the Sender unit. At the receiving end of your coaxial cable
extension, plug your HDMI over RGB Receiver unit into your coaxial cable
endpoints, then plug the HDMI over RGB Receiver into your HDMI display. You
will now see HDMI audio/video at the remote location with perfect clarity and
sound. You can use the optional Gefen IR Emitter cable to extend IR signals.
Note: This HDMI product supports BOTH
Audio and Video signals. Package
Includes: • HDMI over RGB Sender • HDMI over RGB
Receiver • 6 ft HDMI Cable (M-M) • 5V DC Power Supply •
Specifications: • Video
Amplifier Bandwidth: 340 MHz • DisplayPort v1.0 compatible •
Video Resolutions (max): 2K, 1080P, 1920x1200 • Power Consumption: 10
Watts (max) • Coaxial Connectors: 5 x BNC male • IR back
channel : IR blaster • HDMI™ Connector: Type A (19 Pin) Female •
Input Video Signal: 1.2V p-p • Input DDC Signal: 5V p-p • Power
Supply: 5V DC • Dimensions: 4.25"W x 1.25"H x 3.9"D •
Shipping Weight: 4 lbs.
Gefen EXT-HDMI-CAT5 HDMI IR CAT5 Extender(EXTHDMIIRCAT5)
Extending state-of-the-art digital video displays, computer monitors and IR control
signals has never been easier. Distances of up to 150 feet at 1080p resolution (300 feet at 1080i resolution) are guaranteed to perform beautifully, giving you a reliable method ...
ShinyBow SB-5654 1:4 HDMI Distribution Amplifier V1.3c (SB-5654)
The SB-5654 is a four outputs HDMI distribution amplifier featuring
equalized TMDS input and pre-emphasized TMDS outputs. Support HDMI V1.3c For high definition digital of TMDS signal support with HDCP. This distribution amplifier supports data rates up to 1.65Gbps, ...
The SB-6225 is a transmission of HDMI over CAT5/6 category
cable wires for 30M length which supports HDMI 480i/P, 576i/P, 720P(50/60Hz), 1080i and 1080p(50/60Hz). The best install between the HD DVD player and HDMI display monitor with 15M HDMI ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).