The Gefen 4x4 HDMI™ CAT5 Matrix offers unprecedented flexibility and convenience by routing high definition audio/video from any of four HDMI™ video sources to any of 4 remote displays over inexpensive, standard CAT5 cabling.
- Switches easily between any four HDMI™ sources
- Sends up to four video inputs to any four remote HDMI™ displays
- Maintains 1920 x 1200, 1080p, and 2k resolution video
- Extends video up to 300 feet over CAT-5 cable
- Discrete IR remote (included)
- Serial RS-232 remote port
- Rack ears included
- HDMI™ compliant
- HDCP compliant
The Gefen 4x4 HDMI™ CAT5 Matrix offers
unprecedented flexibility and convenience by routing high definition
audio/video from any of four HDMI™ video sources to any of 4 remote displays
over inexpensive, standard CAT5 cabling.
Each remote display
has a control box that allows the viewer to select any of the 4 video sources
and control that source via an IR remote control as if the viewer was standing
in the room where the source originates.
High-Resolution HDTV signals are supported up to a resolution of 1080p at a
maximum distance of 150 feet and 1080i resolutions can be extended up to 300
feet. The Gefen 4x4 HDMI CAT5 Matrix works with HD-DVD players, TiVo systems,
HT PCs, and satellite set-top boxes that connect to an HDMI display. Every
source is accessible at all times by any display by selecting it with an IR
Fully HDCP Compliant
HDCP (high bandwidth digital content protection) is a
standard signal encoded into a video signal to prevent it from being pirated.
If a source device is HDCP encoded and is connected to a display without the
proper decoding mechanism, the picture is relegated to "snow" or a
very low (480P) resolution picture. In order to see high resolution digital
video encoded with HDCP, all devices between the source and the display must be
equipped with HDCP circuitry, as is the Gefen 4x4 Matrix CAT5 Extender.
How it works
connect up to 4 local video sources to the CAT5-Matrixs inputs. Then run each
of your CAT5 cables from the Matrix to the destination displays. At each remote
display, terminate the CAT5 cable run with a HDMI CAT5-MS Receiver device.
Connect each Receiver to a display and youre all set.
Note: This HDMI product supports BOTH
Audio and Video signals.
• 4x4 HDMI CAT5 Matrix
• 4x HDMI over CAT-5
• RMT-16IR Master Remote Control
• Four 6
foot HDMI cables
• 4x 5V DC Power Supplies
• 24V DC Power
• Rack Ears
• Users Manual
• Video Amplifier Bandwidth: 165 MHz
Video Signal: 1.2 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
Single Link Range: 1080p/1920 x 1200
• HDMI Connector: type A 19 pin
• Link Connector: RJ-45 Shielded
• Remote Control
Port: RS232 female, mini-stereo
• Power Supply: 24V DC. 5V DC
Power Consumption: 60 watts (max)
• Dimensions: 17"W x
3.5"H x 5.875"D
• Shipping Weight: 16 lbs.