The 1:8 HDMI Distribution Amplifier is the perfect solution for anyone who needs to send one source of digital high definition video to multiple displays at the same time. Supports all HDMI equipment, such as DVD players and set top boxes.
- Lip-Sync Pass Through
- HDMI™ compliant
- HDCP compliant
- Includes rack ears
- 225 MHz (up to 12 bit YUV 444 supported @ 1080p)
- Deep Color Supported (XV Color Supported)
- Color Space Conversion Supported
- Dolby TrueHD & DTS Master Supported
- CEC Pass Through
- Connects up to ten HDMI™/DVI displays at the same time to one video source
- Allows simultaneous display
- Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved
The 1:10 HDMI™ Distribution Amplifier is the
perfect solution for anyone who needs to send one source of digital high
definition video to multiple displays at the same time. It supports all HDMI™
equipment, such as DVD players and satellite set top boxes and all HDMI
displays. HDMI (High-Definition Multimedia Interface) is a digital point to
point interface for audio and video signals. In operation, the digital video
source is connected to the distribution amplifier on one side. On the other
side, ten HDMI outputs are available to be used in part or in full. Once the
unit is connected and powered, your source is routed to up to ten digital
displays at the same time.
For home theater applications,
the unit is HDCP (high bandwidth digital content protection) compliant, making
it effective for use with all HDMI displays. HDCP is a standard "key"
encoded into the HDMI signal to prevent video data from being pirated. HDCP was
strongly endorsed by the entertainment industry. If a source device is HDCP
coded and is connected to a HDMI display or projector via HDMI without the
proper HDCP decoding mechanism, the picture is relegated to "snow" or
in some cases, a very low (480P) resolution. In order to see protected content,
the source, the display and any device in between must be equipped with HDMI
connections that can enable HDCP using "software key" decoding.
How it works
your HDMI™ video source to the 1:10 HDMI 1.3 Distribution Amplifiers input
using the supplied HDMI cable. Then connect up to ten HDMI displays to the
units ten HDMI outputs. Once connected and powered, your source will be seen on
all ten displays at the same time.
All displays that cannot show the same video resolution(s) as the Primary
Display connected to Output #1 may fail to show a picture. Secondary displays
follow the Primary by sharing the resolution and capability information (EDID)
obtained from the Primary Display.
This HDMI product
supports BOTH Audio and Video signals.
1:10 HDMI Distribution Amplifier
• One 6 foot HDMI cable
External Power Supply
• Rack Ears
• Users Manual
• Single Link Bandwidth: 225 MHz
• Input Video
Signal: 1.2 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
Single Link Range: 1080p/60, 12 bit color depth, 1920x1200
Connector: type A 19 pin female
• Power Supply: 24VDC
Consumption: 60 watts (max)
• Dimensions: 17"W x 1.75"H x
• Rackmountable: 1U rack space
Weight: 8 lbs.