Availability: Usually Ships Same Day Limited Stock. Order Now! Condition:New
Your Price: $3999
List Price: $69.99
An antenna amplifier can help improve your TV antenna signal. A stronger signal can soon be yours. This signal booster will help solve your signal problems. This is how to get better signal and better HDTV reception. Look no further than Solid Signal for great TV antenna tips!
The Winegard Boost 20dB HDTV antenna indoor amplifier is an advanced digital TV antenna amplifier available featuring the lowest noise figure (1 dB typical). The Boost in-line amplifier uses advanced amplifier technology and enhances any non-amplified antenna. It boosts reception of low signals, which allows for better reception of faraway stations. Call Solid Signal to get the Winegard Boost 20dB HDTV antenna indoor in-line amplifier.
Includes: amplifier, USB power cable, and 110V power adapter
Plug-and-play solution to overcome signal loss from long cable runs and enhance weak TV channels
Pro tip: For best performance, install before splitter or right at TV connection
No outdoor installation required
Bias (power supply): +5 V at 60 mA
Gain: 20 dB
Made in the USA
90-day limited Warranty
MADE IN USA
Includes: Amplifier, USB Power Cable, 110V Power Adapter
90 Day Limited Warranty
Bias (power supply): +5 V at 60 mA
Noise Figure: 1.0 dB
Output IP3: +35.5 dBm
Power Out (P1db): +18.4 dBm
Gain: 20 dB
Ultra low noise figure – 1.0 dB typical
Power: +5 volts
USB power cable with 110V adapter
Works with any non-amplified/passive TV antenna
Energy saving USB power supply with LED power indicator
Innovative engineering from Winegard, the antenna experts
Boost is the most advanced digital TV antenna amplifier available featuring the lowest noise figure (1 dB typical).
Using the latest advances in amplifier technology, Boost, enhances any non-amplified antenna, delivering more range and available channels. Give your antenna a Boost today!
Works with any non-amplified/passive TV antenna Clear Circuit Technology™ increases range and channels while eliminating pixelation and dropouts Ultra low noise figure – 1.0 dB typical Energy saving USB power supply with LED power indicator Innovative engineering from Winegard, the antenna experts MADE IN USA
Here are available downloads related to this product:
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (6 reviews):
Recent Review: Mik Analog - Berryville, VA - 2/1/2015 Works great, included power supply died
Works great, included power supply died Mik Analog - Berryville, VA - 2/1/2015 7:02:59 PM I used this to replace a Cabletronix CT-BDA24 which was a good, higer gain, but higer noise amp. Night and day better. Then after about a year one channel disappeared, then another, finally I couldn't get anything. The included supply had quit. I power cycled it and it came back, but still not great performance. I then replaced the supply with better wall wart, and bam! all my channels where back, better than before. Next, I'll swap it with a 5VDC linear supply with mucho RF filtering.
Nice, compact signal amplifier and appears to work as described Free TV - Moore, OK - 9/5/2014 7:58:40 AM coupled with a good outdoor antenna (channel master 3000HD in my case), this product has exceeded my expectations. The Tivo Roamio I use shows that the signal boost to all channels I receive is at least 20% better
Very Quiet -Almost Transparent with 20 DB of Gain! FrankH - Evansville, IN - 8/17/2014 12:59:41 PM I operate a Frequency Measuring Service for Broadcast TV and Radio. I measure signals as much as 200 miles distant. Obviously I have some tall and very good antennas, but when I purchased one of the LNA100';s I was skeptical. However, I can say that the LNA 100 is the best Amplifier I';ve found to date, at a reasonable price. Some signals that I measure set at -95 to -105 DB on my spectrum analyzer. This amplifier has fairly flat gain (20 DB +/- 3 DB) from Channel 2 to well beyond the presently authorized upper UHF Channels. When I put the LNA100 in line I can barely see the Noise Floor of the Spectrum Analyzer change, but the desired weak signal becomes easily measured with the ~ 20 DB of gain. NOTE: It does not amplify the FM Broadcast Band! Get one--you wont be disappointed.
Simple installation, dramatically improved OTA reception. Mohu Sky HDTV antenna user - Quakertown, PA - 8/7/2014 2:36:09 PM Couldn';t receive local OTA channel 6 ABC and channel 2 would become pixelated almost every day. I decided to see if it was the amplifier (one was supplied with the antenna) and replace it with this Winegard LNA-100 Boost based on the reviews. Well as soon as I completed my first channel scan both 6 and 2 came in clear as a bell AND they have stayed that way. I would highly recommend this amplifier!
works - brought in/clarified 6 new stations.Only issue was (female)connector. bill - derwood, MD - 8/20/2014 1:51:59 PM the connector on the antenna side of the amplifier is female. The connector on the HD Blade I had earlier purchased from Solid Signal also has a female output connector. Thus amplifier can not be directly connected to the antenna- an intervening connector or cable is required.
Definitely Not for Commercial Installs! rogerx - Ashtabula, OH - 7/19/2015 11:19:27 PM I purchased this unit likely either through Solid Signal or Amazon.com, and immediately found the USB connector to be lacking a stable permanent connection. The loose USB connector is easily pulled out from the socket.
Due to this and the fact I was installing the units within a crawl space and basement areas, I immediately decided to go with the Channel Master preamp. Yes the Channel Master has a little more noise, but it also provides better amplification. If you're within medium range, you might find the Winegard superb due to being within adequate range. If you're pushing the limits of a transmitter tower, definitely choose the Channel Master preamp. You'll likely fair much better.
16 dBm optical output power Erbium Doped Fiber Amplifier for
use with C-Band 1550nm fiber optics. Thor F-EDFA series units are general purpose optical amplifiers for channels within the DWDM spectrum bands (1540-1565nm). These amplifiers are designed for amplification ...
Model LA281R boosts cable and DBS signal levels off setting
the loss of 300 feet of RG-6 while passing data modem and receiver control signals from the receiver to the switch.. Features. Indoor / Outdoor 54 to 2400 MHz ...
The LNFA1X4 Low Noise Filtered Amplified GPS Splitter is a
one input, four output device with 0dB nominal gain. The device features a low noise input section to establish an overall system noise figure. Excellent port-to-port isolation and unity ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).