Solid Signal > Commercial Equipment > Headend Equipment


PDI SAT PDI-60MS-SAP Agile Frequency Modulators (PDI-60MS-SAP)

Click Images to Enlarge

PDI SAT PDI-60MS-SAP Agile Frequency Modulators (PDI-60MS-SAP)

Brand: PDI SAT           P\N: PDI-60MS-SAP          

No Reviews Available  Be the first to write one!


Availability: Discontinued

Looking for something similar? Please contact us at info@solidsignal.com or call us at 877-312-4547 for recommendation.


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


The PDI-60MS is a PLL synthesized, SAW filtered, frequency agile modulator. It offers 133 TV channels at an output of 60dBmV. This exceptional unit is manufactured and tested to the highest standards and complies with all FCC requirements.

Features


  • Microprocessor Up/Down button to select output channel in the range of 2 to 134 (54-860MHz) which includes A-5 to A-1 (95 to 99)

  • FCC offset externally selectable, 0kHz, +12.5kHz or +25kHz

  • Professional grade SAW vestigial sideband filter for true adjacent channel operation

  • Three loop-through connections for separate video, audio or composite IF control

  • 4.5MHz audio carrier input for microwave or external stereo

  • MTS Stereo Encoding and SAP Generator

  • +60dBmV RF output level (54-860MHz)

Specs


Rf Section
Output Channels
UP/DOWN Selectable 2 Through 134 and A-5 to A-1.
Output Level  +60dB Range
Output Level Adjustment  20dB Range
Spurious Output    At least 60dB Below Video Carrier
Broadband Noise  80dB Below Video Carrier (@ +60dBmV Output)
Frequency Stability ±5kHz Maximum (±3kHz typical)
Vestigial Sideband Response -20dB at IF Channel Edge; -60dB at Adjacent
 
Video Section
Input Type Composite Video, Negative Sync.
Input Level 0.5 Vp-p Min. for 87.5% Depth of Modulation
Frequency Response +0.75dB (10Hz to 4.2MHz)
Differential Gain 3% Typical at 87.5% Modulation
Differential Phase <3 Degrees Typical at 87.5% Modulation
Hum and Noise -60dB Min. at 87.5% Modulation
Tilt   1.1% Maximum on 60Hz, 50% Square Wave
 
Audio
Input Type Unbalanced (Balanced optional)
Input Impedance 600 ohms
Input Level 250mV Min. for 25kHz Deviation
Frequency Response  Mono ±0.75dB (30Hz to 15kHz)
Intercarrier Frequency 4.5MHz ±100Hz

Stereo Specifications
Frequency Response 20Hz to 14kHz + 1dB
Separation  27dB 20Hz to 14kHz Typical
Pilot Rejection 50dB
Signal to Noise Ratio 60dB
Audio Input Impedance 10K ohms unbalanced
(600ohms balanced optional)
 


Discuss










Product Reviews for PDI SAT PDI-60MS-SAP Agile Frequency Modulators (PDI-60MS-SAP)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2016 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail