Availability: Usually Ships Same Day Condition:New
Your Price: $9999
List Price: $139.95
The mount only low profi le projector mount for projectors
shall be a Video Mount Products (VMP) model number
PM-LPM. The mount shall be primarily constructed of
formed steel and shall incorporate arc welds. The mount
shall have adjustable tilt of ±20°. The mount shall have
adjustable pitch of ±15°. The mount shall have adjustable
yaw of ±180°. The mount shall be able to fi t most projectors with hole patterns inside a 14.5” diameter. The mount shall have cable management capability through the center of the mount. The mount shall have a ceiling plate included. The load capacity shall be 75 lbs.
Low 2.625” mounting profi le (measurement includes the mounting feet)
ProMounts CT-PRO200 Ceiling Tile Plate for Projector Mount
The Lightweight Suspended Ceiling Plate for Projector Mounts consists of
an 8"(203mm) x 24"(610mm) filler tray and a 15.75"(400mm) x 24"(610mm) ceiling tray suspended by four tie wires from the true ceiling above. Can be used with. UPR-PRO200. .. ...
The adaptor which will allow two ceiling mounted large flat
panels shall be the Video Mount Products (VMP) PDS-LCM2B. The adaptor shall be used in conjunction with the Video Mount Products (VMP) PDS-LCB to mount two flat panels to ...
VMP SCM-1 Suspended Ceiling Mounting Adaptor White (SCM-1)
An suspended ceiling mounting kit which can accommodate 1.5" NPT
pipe as well as the standard mast included with any VMP mount with a load capacity under 75 lbs. Works with any mount which accepts 1.5” NPT.. Features. For ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).