CATV Analyzer with Independent Span & RBW
The PSA-37XP covers the whole CATV frequency range from 1 to 1100 MHz in addition to the Satellite L band from 950 to 2150 MHz. The unit has ±2 dB amplitude accuracy which makes this the perfect analyzer for the field technician or for testing and setting headend levels. The variable span width makes it easy to either look at the whole band or pinpoint a particular frequency/channel.
No AC/No Problem:
Battery power (and a built in charger) lets you work right at the antenna; no need for extension cords. You can also run or charge on vehicle or line power. The PSA-37XP has a built in DC block with +13/18 VDC & 22 KHz for powering LNAs and LNBs.
Satellite Dish Alignment a Snap!
If you are doing DBS installs, you need to be on and off the job fast! DBS signals such as DISH NETWORK, PRIMESTAR, and DIRECT-TV can be seen with Avcom’s PSA-37XP. Normal DBS antenna alignments, such as roof, wall or backyard can be accomplished in
seconds because the DBS receiver and TV monitor do not have to be at the antenna.
Creative Installations Made Easy
The PSA-37XP can really help with more creative DBS dish installations inside buildings, looking through sparse foliage or windows, smaller antennas, etc. When the signal is not optimum, using the PSA-37XP, the signal can be quickly located and measured even though it is below the receiver’s signal strength requirement.
||a. 1 - 1100 MHz|
b. 950 - 2150 MHz
c. 2100 - 3200 MHz
d. 3200 - 4200 MHz
Extendable with MFC’s to 18 GHz
| Frequency Display:
||LCD 2 Line Display with Center|
Frequency & Span Start/Stop
||>1 GHz - 0|
| Resolution Bandwidth:
||3 MHz, 1 MHz, 300 KHz, 75 KHz|
| RF Sensitivity:
||> -90 dBm Typical|
| Reference Levels:
||0, -20, & -40 dBm / +49, +29, & +9 dBmv|
||2 dB/Div. or 10 dB/Div. Variable|
| Amplitude Accuracy:
||±2 dB Typical Per Band|
| Dynamic Range:
||65 dB On Screen|
| Input Connector:
||BNC, & N, DC Blocked, 50 Ohm|
Impedance N-F Adapter Included
| LNB Power:
||+13/18 VDC & 22 KHz Signal|
| Maximum Input:
+10 dBm @ 0 dB Reference Level
-30 dBm @ -40 dB Reference Level
||11.5”W x 5.5”H x 13.5”D/17 lbs|
29.2 cm x 14 cm x 34.2 cm/7.72 kg
| Power Requirements:
||Universal Power 85 - 265 VAC 50/60 Hz|
12 VDC Cigar Adapter Cable Incl.
Internal Batteries & Charger
Sealed Gel Cell PS-630/UB-634
||5” Diagonal CRT Green Phosphorous|