Home > Commercial Equipment > Converters > Kramer Electronics PT-571
The PT-571 is a twisted pair transmitter for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572 converts the twisted pair signal back to an HDMI signal.
- DGKatT Signal Integration - Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat cables designed specifically for optimum performance
- Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached
- HDMI Support - HDMI (V.1.4 with Deep Color, x.v.ColorT, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD)
- System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable
- Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground
- Ultra-Compact Pico TOOLS - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter
- Rack Adapters: 19" (1U): RK-4PT Compatible Receivers: PT-572 This product replaces the TP-551N
- Power Connect System - A single connection to the transmitter powers the receiver
- EDID PassThru - Passes EDID/HDCP signals from source to display
- Max. Data Rate - 1.65Gbps
- HDTV Compatible
- 3D Pass-Through
- HDCP Compliant
INPUT: 1 optical (digital audio) on a TOSLINK® connector.
OUTPUT: 1 S/PDIF (digital audio) on an RCA connector.
SAMPLING: 32kHz to 192kHz.
POWER SOURCE: 12V DC, 50mA.
DIMENSIONS: 4.27cm x 2.2cm x 5.64cm (1.68" x 0.87" 2.22") W, D, H.
WEIGHT: 0.3kg (0.67lbs) approx.
ACCESSORIES: Power supply
Here are available downloads related to this product:
You May Also Consider
Product Reviews for Kramer HDMI over Twisted Pair Transmitter (PT-571)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!