Home > Installation Tools > Signal Meters > Solid Signal Satlook-color
The unit is made for exact alignment and adjustment of satellite-dishes. It is intended for professional use when high accuracy and precise information are needed. It´s easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn. The SAT-part also has very high resolution and accuracy. It presents measured data ±1½ dB (at 20° C).
- Spectrum-analyzer 950-2150MHz
- DiSEqC according to level 1.0, 1.1 and 1.2
- SatCr-control (UniCable)
- Favorite channel list (100 channels) for FTA DVB-S
- Lots of memory positions for spectrum pictures
- RS232 for PC-connection (up/download)
- Rechargeable Li-Ion battery
- Powered by Emitor
- DVB/S S/2 -receiver 920-2150MHz
- Super bright 5” 16:9 TFT-LCD color display
- Automatic Satellite identification
- Readout of NIT - gives SAT ID and TV/Radio-channel info
- Digital BER and S/N-ratio (DVB-S, S/2)
- QPSK and 8PSK constellation diagram
- DVB-S (Free to Air) and SAT-analog TV-picture
- LNB voltage 13/18V, 22KHz tone switch
The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarisation (“cross-polarisation”). The SAT- part presents, under one of the sub menus, digital information
like BER (bit error rate), constellation-diagram (QPSK and 8PSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the various TV-satellites by
reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels. The unit has a built in DVB S-receiver which can store up to 100 Free To Air
channels in a favourite channel-list. SATLOOK HD COLOR can handle a lot of memory-positions and both
spectrum-pictures and certain frequencies can be saved (both analog and digital transponders). The power of the instrument is supplied by a built in and rechargeable
battery. The instrument is provided with a 5” color 16:9 LCD-monitor. Menus/help-displays are shown on the LCDscreen (64x128) beside the monitor.
Input frequency: 920-2150MHz.
Sat-TV min level in: About 35 dBuV (noise).
Sat-TV max level in: About 90 dBuV.
Sat-TV attenuation: 15 dB attenuator on/off.
Display of signallevel
dB on LCD/monitor. Pitch-tone.
Sat-TV accuracy: ±1½ dB (at +20° C).
DVB-S S/2 Digital display
S/N (signal/noise-ratio) BER (bit error
rate) Constellation (QPSK and 8PSK).
Satellite-indentification: Yes, by reading out the NIT in the
Bitstream. Info about the TV and Radio
TV standard: Multi TV/ (PAL, NTSC, SECAM).
KU- C-band: Yes, selectable.
Input impedance: 75 Ohm, BNC-con.
Picture-screen: 5” 16:9 TFT-LCD monitor
Menus: On LCD 64x128.
Memory: - Lots of spectrum pictures can be stored
Stored spectrum can be mixed for easy
identification of satellite.
Favouritechannels: Both analog and digital frequencies can
be stored (with name).
100 DVB-S Free to Air channels can be
stored in a favourite channel-list.
PC-connection: RS232-output and PC-software.
Sat-TV power out: Yes, 13-18V.
Sat-TV control: 22 kHz, DiSEqC SatCr (UniCable).
DiSEqC: Yes, all 1.0 and 1.1. 1.2, Toneburst on/off.
DiSEqC actuator: Built in positioner for DiSEqC 1.2,
Battery: Rechargable 12v, 3.5 amp/hour.
Weight: About 4 kg incl. battery.
Accessories: Nylon carrying-case.
Power-supply of 220v/13.5v, 1.7amp.
1 Year Warranty on Meter
6 Month Warranty on Batteries
Here are available downloads related to this product:
You May Also Consider
Product Reviews for Solid Signal Satlook Color HD Spectrum Analyzer (Satlook-color)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!