Availability: Usually Ships Same Day Condition:New
Your Price: $69760
List Price: $975.00
The SB-5645AK is professional 4x4 matrix routing switch. It supports four HDMI inputs and four auxiliary audio inputs. Output supported are HDMI and S/PDIF audio. The SB-5645AK is based on the HDMI standard and supports full resolution HDMI Video with embedded EDID, with a signal bandwidth of 340Mhz, there is no signal degradation.
Four (4)x HDMI with Auxiliary Audio (Analog Audio) source devices matrix switched to Four (4)x HDMI with S/PDIF output destinations.
HDMI digital Video w/embedded HDCP, DVI format and CEC/HDCP 1.3 compliant
Worldwide control EDID modes for HDMI full 4K2K (24/30 Hz) HD Video resolutions
Link speeds of up to 6.75 Gbps (link clock rate of 340MbHz), Support HDMI 4K2K, 1.4a 3D formats
Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV HDMI resolutions 480i/480p, 576i/576p, 720p, 1080i/p & 4K2K (24/30Hz)
Digital Video TMDS formats Resolution up to 4K2K with Deep color 36-bit.
Digital Audio Support: - Dolby TrueHD - Dolby Digital - Dolby Digital Plug/ex - DTS - DTS-HD - DTS-HD Master - DTS-EX - PCM, PCM2, LPCM2
Audio Input: Support Auxiliary Audio (Analog stereo audio)
Audio Output: Support Digital audio ARC or Digital audio S/PDIF (from HDMI source or Auxiliary Audio)
Various User Interface controls: - Windows based GUI control via RS-232 port - Front Panel push button - IR wireless remote controller - Ethernet Switch control - Third party RS-232 controller (via simple ASCII)
Support world wide 9x control function keys
Full function front panel controls : ARC / AUX/ ALL / OFF / EDID / LOCK / RECALL / MEMORY / ENTER
Supports seven (7) worldwide standard embedded EDID modes
Automatic scanning input & output status via LCM show on front panel
Support IR Remote and IR Extender with distance up to ~ 984 feet (300M) Maximum
Support Universal power adaptor AC100V~240V, 50/60Hz
High Definition Digital signals can be selected and distributed to any (4) Inputs to (4) outputs. The Switcher is certified as being fully CEC , ARC and HDCP 1.3 compliant, full HD 4K2K HDMI™ V1.4a 3D formats, data rates up to 6.75 Gbps. Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD displays. The SB-5645AK has 1x HDMI™ and Auxiliary Audio(analog stereo audio) connector for Input, effectively making this an 8 in x8 out switcher. The EDID management can be selected between seven (7) different modes. Control is provided via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).
Perko Medium Duty Battery Selector Switch 250A Continuous
Medium Duty Battery Selector Switch - 250A Continuous, For use
with 6 two 50 Volt Marine Electrical Systems, Capacity - 250 AMPS Continuous, 360 AMPS Intermittent, When used with Non-Unitized Alternators, these models will interrupt the field current (reducing ...
The Paragon Base Station delivers optimum data rates while balancing
coverage and capacity. Based on open IP architecture, each Paragon controller is equipped with a standard IP router, dual Ethernet 10/100 BaseT interfaces and AES 128-bit encryption to ensure ...
Havis CG-X ChargeGuard, 12V Negative Ground Timer Switch
The Havis ChargeGuard Select CG.X automatic on/off timer switch acts
as a vehicle power management system by automatically turning on mobile equipment when starting the motor. The 12 volt negative ground ignition sensing timer switch is designed for two-way ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).