Solid Signal > Cell Phone Accessories > Signal Boosters
The cellular signal booster of your dreams is now right here at Solid Signal. This cell amplifier is a great way to get better phone reception. When you use a cell phone network extender you may see drastic improvements in your phones calling capabilities. Enjoy the best cell phone reception with a cell phone repeater. This is how to boost your phone signal so your call quality improves. A cell booster will give you the best cell phone reception and reduce your dropped calls.
72dB dual-band manually adjustable, highly linear booster kit for areas up to 25,000 sq. ft. Kit includes 30 ft and 75 ft of SureCall 400 low loss coax cable, 2-way splitter, outdoor yagi antenna, and two indoor panel antennas.
- Installation notes:
- In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will shut down). This amplifier requires approximately 60 of separation between the outside and inside antennas. Separation can be horizontal or vertical.
- If you cannot achieve adequate separation to eliminate oscillation, you can turn down the gain on the amplifier, but that will result in a smaller coverage area from the amplifier.
- The interior antennas should be at least 10 ft away from the amplifier.
- Make sure the panel antennas are aimed AWAY from the outside antenna.
- Features & Benefits:
- Industry’s only product line of highly linear signal booster
- Covers all U.S. Cellular and PCS bands including G-Block
- Independently reconfigurable for each band
- Independently, digitally adjustable uplink and downlink
- Built in safeguards completely eliminates interference to cell tower
- Approved by all major US carriers
- Reconfigurable in the field through software
- Dual Embedded CPU for smarter technology
- Eight RSSI detectors for all inputs and outputs
- Stealth technology incorporated; uplink becomes dormant when not in use, providing green, power saving operation
- FCC certified for new rigid network protection standards
- Quality metal construction, durable and resilient
- Lowest Out of Band Emissions (OOBE)to date
- Offers the industry’s best three-year warranty
- Package Includes:
- 65/72db AG amplifier
- CM230W yagi exterior antenna
- CM222W interior dome antenna
- 30ft CM400 cable (N/Male connectors)
- 75ft CM400 cable (N/Male connectors)
- AC power supply
- Frequency Range: Uplink: 824-849/1850-1915Mhz - G Block incl; Downlink : 869-894/1930-1995Mhz - G Block incl.
- Standards Supported: CDMA, WCDMA, GSM, EDGE, TDMA and AMPS etc
- Gain: 65dB Cellullar / 72dB PCS
- Max Output Power: 1 watt EIRP
- Impedance: 50ohms
- Noise Figure: Maximum 5 dB
- VSWR: Less than 2:1
- AC Input: 12V
- RF Connectors: N Female on both sides
- Power Consumption: <10W
- Dimensions: 10.05" x 7.5" x 2" (amplifier)
- Weight: 8.05 (amplifier)
- FCC ID (USA): RSNDUALFORCE
This repeater kit is best for users with direct line of sight to the cell tower (necessary because this kit includes a directional Yagi antenna) who need to provide amplified voice and 3G signal for up to 100 users in a large building.
- Coverage area: up to 25,000 square feet
- All-in-One Kit? YES
- Compatibility: 800mhz/1900mhz networks, which are used by most 2G (voice) and 3G networks in the USA, including:
** Verizon 2G/3G
** Sprint 2G/3G
** AT&T 2G/3G and HSPA+ (which shows up on your device as "4G" - NOT LTE)
** Datajack and Virgin Mobile 3G
** T-Mobile and Cricket 2G
** Does NOT work with LTE (Verizon/AT&T/Sprint/US Cellular/MetroPCS 4G), WiMAX (Sprint/CLEAR 4G), Nextel/iDen, or AWS (T-Mobile 3G/4G and Cricket 3G)
You May Also Consider
Product Reviews for SureCall DualForce Yagi 2-Panel Kit (SC-DualO-72-YP2-KIT)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!