Has an energy saving switch mode power supply and supports standby logic. The satellite IF amplifiers and the remote voltage to power an LNB are only active when at least on receiver is connected. This compact switch has the option of either active or passive terrestrial and can be used at the end of a cascade system to add extra outlets.
On-board attenuators allow levelling of input signals
Satellite amplifiers have pre-emphasised response
Return path compatible with terrestrial passive mode
LNB voltage selectable
Highly selective filters at the inputs to ensure interference products cannot overload amplifiers
Push-pull terrestrial output stage for multi-channel operation
This is a special order product and is not returnable
Spaun AZR-99290-10F Multi Tap Off Air Satellite (AZR-99290-10F)
Multiple taps with direction coupler for terrestrial and SAT. To
install digital distribution networks with multiple supply lines, these devices reduce the installation cost significantly. The terrestrial line is return path compatible. The trunk line DC path is linked ...
The SMS5xx03NF range of multiswitches replaced SMS5xx02NF range which was
the benchmark against which all other multiswitches were compared. With premium design features and the use of ultra slim housing the SMS design has long been the first choice ...
The SMK5000F switch series is designed for use with the
SBK5000 series of high level launch amplifiers. Because the SMK switch series is passive there are no limitations to the level achievable at the switch ports, giving an unparalleled ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).