Solid Signal > Wire & Cable > RG-6 Cut-to-Length


Solid Signal Custom Length Razor Thin Coax Cable Blue (1000 Foot Spool)

Click Images to Enlarge

Solid Signal Custom Length Razor Thin Coax Cable Blue (1000 Foot Spool)

Brand: Solid Signal           P\N: SSCBLM1000B          

No Reviews Available  Be the first to write one!


Availability: Usually Ships Same Day
Condition: New


Your Price: $23999


List Price: $311.99




Qty:


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Solid Signal Quantity Discounts Available (Minimum 20)

This solid copper conductor cable is ideal for satellite, off-air or cable TV setups. Reduce signal loss by only running the amount of cable necessary.


Features


  • Cable has been sweep tested up to 3.0 GHz

  • Razor thin cable means easier installations, and less clutter

  • Compatible with extending RG59 and RG6 Coaxial cable runs

  • Outperforms "home improvement store" RG6 cable in real-world testing

  • Click here to get compression connectors for your cable

  • Click here for a cable stripping tool

  • Click here for a compression tool

  • Reduce signal loss by only running the amount of cable necessary

  • Save money by eliminating the need for expensive compression and stripping tools

  • Avoid clutter by organizing your audio video system

  • Bare solid copper conductor

  • Two layers of shielding: (1) 100% Bonded Aluminum / Poly tape overlap. (2) 95% Braid 16/6/0.12mm TC

  • Coax diameter 0.159-inch (4.04mm) nominal

  • Greater than 22 dB return loss at 1 GHz

  • UL Listed

Specs


Coax Sizing (inches) Min ~ Max
Center .0399 ~ .0418
Dielectric .180 ~ .193
Outer Jacket .265 ~ .305

Coax Sizing (mm) Min ~ Max
Center 1.01 ~ 1.06
Dielectric 4.57 ~ 4.90
Outer Jacket 6.73 ~ 7.75

The FS6U is our Universal "F" type connector that fits most RG6 standard, tri-shield, and quad-shield coaxial cable.

• 75 Ohm Construction
• DC-1 GHz > 30 dB Return Loss < 1.07 VSWR
• DC-2 GHz > 26 dB Return Loss < 1.10 VSWR
• DC-3 GHz > 23 dB Return Loss < 1.16 VSWR
• Cable Pullout Force Exceeding 65 in/lbs.
• Body Material Brass
• Body Material (Plating) Nickel
 

 

Frequency (Hz)

5 MHz

15MHz

550 MHz

750 MHz

1000 MHz

2000 MHz

3000 MHz

dB

-
43.4 dB

-44.2 dB

-42.1 dB

-41.4 dB

-43.1 dB

-31.8 dB

24.1 dB
 

Mechanical
Requirements

Specifications

Limits

Test Results

Corrosion Resistant Telcordia™ GR-1503 3.2.1 Conforming Materials Exceeds
Cable Application Telcordia™ GR-1503 3.2.2 <20 lbs.Max Insertion Exceeds
Cable Interface Telcordia™ GR-1503 3.2.3 >40 lbs. Pull Force Exceeds
Equipment Interface Telcordia™ GR-1503 3.2.4 >10 matings Without Damage
>60 in./lbs.Without Damage
Exceeds
Temperature Cycling with Humidity Telcordia™ GR-1503 4.1 70 °F to 140 °F to -40 °F
Must Pass 3.2.3 Specifications
After 7 Days
Exceeds
Loosening Torque Telcordia™ GR-1503 4.2 >30 in./lbs. After 3 Days of 4.1 Exceeds
Moisture Migration SCTE IPS-TP-013 No Dye Penetration Exceeds
Salt Fog Telcordia™ GR-1503 4.4 Return Loss >30 dB @ 1 GHz Exceeds
Environmental Pollutants Telcordia™ GR-1503 4.5 Return Loss >30 dB @ 1 GHz Exceeds
Vibration Telcordia™ GR-1503 4.6 Loosening Torque >32 in./lbs Exceeds
Chemical Resistance Outdoor1 Telcordia™ GR-1503 4.7 7 Days Exposure Exceeds
UV Degradation1 Telcordia™ GR-1503 4.8 7 Days Exposure Exceeds
Ozone Degradation1 Telcordia™ GR-1503 4.10 70 Hours Exposure Exceeds
       
Electrical
Requirements
Specifications Limits Test Results

Insulation Resistance Telcordia™ GR-1503 3.5.1 >5,000 megohms @ 100 V dc Exceeds
Dielectric Strength Telcordia™ GR-1503 3.5.2 >1 kV ac for 1 Minute Exceeds
Insertion Loss Telcordia™ GR-1503 3.5.3 <0.1 dB to 350 MHz
<0.2 dB to 700 MHz
<0.3 dB to 1 GHz
Exceeds
Return Loss Telcordia™ GR-1503 3.5.4 >30 dB to 1 GHz Exceeds
Shielding Effectiveness Telcordia™ GR-1503 3.5.5 >95 dB to 300 MHz
>70 dB to 1 GHz
Exceeds


Note 1: Samples will not exhibit cracking, swelling or brittleness. Digicon connectors were tested to meet SCTE-IPS and TelecordiaTM specifications. Where both organizations have specifications for the same requirement, Digicon connectors were tested to the more rigorous requirement.



Discuss





RELATED SEARCHES







Product Reviews for Solid Signal Custom Length Razor Thin Coax Cable Blue (1000 Foot Spool)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



  RELATED PRODUCTS
Related Products
S1D60MN-B-R1K Single RG-11 has 60% braid with 0.072" galvanized steel ...
Belden, 16 AWG, PVC insulated tinned copper wire for electronic ...
Belden Series 6, 18 AWG solid .040" bare copper-covered steel ...


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2016 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail