Availability: Usually Ships Same Day Condition:New
Your Price: $399 - $47
This is a solid copper RG6 cable from Solid Signal cut to your selected length that provides the best result in any professional installation. Made of the highest possible quality, these cables feature high-end compression fittings for use in high-bandwidth cable or satellite installations. These high-end, cost-effective coaxial cables are the best product for your project. Don’t use any old cable you might have sitting around – use the right one for the job!
Works great for satellite, cable, and TV/radio antennas
Features a solid copper conductor for more reliable signal strength and passing power over long distances
Weather-tight compression connectors for extended durability
Black in color
Quantity Discounts Available (Minimum 20 Feet)
Each cable is tested for ground and tip continuity
Reduce signal loss by only running the amount of cable necessary
Save money by eliminating the need for expensive compression and stripping tools
Avoid clutter by organizing your audio video system
Meets same requirements as DIRECTV, Comcast, DISH Network, Road Runner, Time Warner Cable, Cox Communications, and Charter Communications Cablevision.
Coax Sizing (inches) Min ~ Max Center .0399 ~ .0418 Dielectric .180 ~ .193 Outer Jacket .265 ~ .305
Coax Sizing (mm) Min ~ Max Center 1.01 ~ 1.06 Dielectric 4.57 ~ 4.90 Outer Jacket 6.73 ~ 7.75
The FS6U is our Universal "F" type connector that fits most RG6 standard, tri-shield, and quad-shield coaxial cable.
• 75 Ohm Construction • DC-1 GHz > 30 dB Return Loss < 1.07 VSWR • DC-2 GHz > 26 dB Return Loss < 1.10 VSWR • DC-3 GHz > 23 dB Return Loss < 1.16 VSWR • Cable Pullout Force Exceeding 65 in/lbs. • Body Material Brass • Body Material (Plating) Nickel
Telcordia™ GR-1503 3.2.1
Telcordia™ GR-1503 3.2.2
<20 lbs.Max Insertion
Telcordia™ GR-1503 3.2.3
>40 lbs. Pull Force
Telcordia™ GR-1503 3.2.4
>10 matings Without Damage >60 in./lbs.Without Damage
Temperature Cycling with Humidity
Telcordia™ GR-1503 4.1
70 °F to 140 °F to -40 °F Must Pass 3.2.3 Specifications After 7 Days
Telcordia™ GR-1503 4.2
>30 in./lbs. After 3 Days of 4.1
No Dye Penetration
Telcordia™ GR-1503 4.4
Return Loss >30 dB @ 1 GHz
Telcordia™ GR-1503 4.5
Return Loss >30 dB @ 1 GHz
Telcordia™ GR-1503 4.6
Loosening Torque >32 in./lbs
Chemical Resistance Outdoor1
Telcordia™ GR-1503 4.7
7 Days Exposure
Telcordia™ GR-1503 4.8
7 Days Exposure
Telcordia™ GR-1503 4.10
70 Hours Exposure
Telcordia™ GR-1503 3.5.1
>5,000 megohms @ 100 V dc
Telcordia™ GR-1503 3.5.2
>1 kV ac for 1 Minute
Telcordia™ GR-1503 3.5.3
<0.1 dB to 350 MHz <0.2 dB to 700 MHz <0.3 dB to 1 GHz
Telcordia™ GR-1503 3.5.4
>30 dB to 1 GHz
Telcordia™ GR-1503 3.5.5
>95 dB to 300 MHz >70 dB to 1 GHz
Note 1: Samples will not exhibit cracking, swelling or brittleness. Digicon connectors were tested to meet SCTE-IPS and TelecordiaTM specifications. Where both organizations have specifications for the same requirement, Digicon connectors were tested to the more rigorous requirement.
Avoid having excess Ethernet cable lying around by building your
own cables to the exact length needed using this Bulk Ethernet Copper Cable from Tech Choice. This 1000 foot roll of unshielded (UTP) Cat5e cable uses solid conductors and ...
This UL-Listed, RoHS CMR compliant premise cable has solid copper
conductors and differential twisted pairs to reduce crosstalk. This CAT6a Ethernet networking cable comes stored on a wooden reel to aid in wiring installations.. Features. Length: 1,000 ft.. Packaging: ...
This 15 ft. Sub Woofer Cable is compatible with today’s
advanced digital products.. Features. Gold Plated, split-centerpin conductor to acheive a spring type ffect.. 18 Gauge solid wire. 12-segment Spring Radial Cut connector offers ultimate protection from outside low-level ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).