The ST-4000D is newly updated hand-held CATV signal level meter that has been fine tuned to handle an expanded channel range ,sub-band channels T7-T14, as well as the basic needs of maintaining RF distribution systems. Its rugged design and protective carrying case make it a great choice for everyday use.
New-Expanded Sub-Band Channel Range (T7 - T14)
Full Bandwidth Operation (CATV: Ch. 2-136, Off-Air: 2-69)
Analog, Digital ATSC, 8VSB Measurement
Wide Dynamic Range (-28 to 55 dBmV)
Signal Level Measurements (Aural and Visual Carriers)
Direct Channel or Frequency Entry
Group Channel Selection (For quick system tests just push a button and read only the favorite channels)
FREQUENCY & LEVEL Range: 5 - 870 MHz in 10 kHz steps Resolution Bandwidth: 280 KHz ± 50 KHz Channels: All user designated NTSC/ATSC channels Level Range: -28 dBmV to +55 dBmV Accuracy: ±2.5dB @ room temperature Input Impedance: 75 ohms Wave Detection: Peak value
AUTO SCAN Max Channel Scan: 135 channels Scan Range: All frequencies 7 to 870 MHz Scan Speed: 30 channels minimum Memory Groups: -28 dBmV to +55 dBmV
POWER Battery: DC 7.2V/1.5Ah Ni-MH AC Supply: AC 110V/60 Hz ±10% Battery Life: 5 hours of continuous operation
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).