Home > Cable & Wire Supplies > CAT-5 Accessories > Sewell Direct SW-32886
Extend an audio signal from a 3.5mm or RCA port to your speakers up to 2000ft away. Built-in switching technology allows for up to two inputs and two outputs, meaning you can connect two audio sources and switch between them to one of two different sets of speakers. The Sound-Link also works to convert 3.5mm to RCA or the other way around. The connection type does not even need to be the same, it simply works all the time.
- Distance: 2000ft
- Up to two inputs
- Up to two outputs
- Switch between inputs and outputs
- Converts RCA to 3.5mm and vice versa
- Connection type does not have to be the same on each end
Since Cat5e/Cat6 extenders (aka Baluns)
work differently than typical ethernet networks, the quality of the
network cable you use really does matter. The bottom line is that
Ethernet networks have corrective measures in place to help balance the
data load and prevent packet loss, while point-to-point extenders like
this don't have this option. For this reason, using cable with extra
shielding and extra-robust conductors (like our SSTP Cat6 cables made for extenders) to overcome any potential attenuation issues is recommended.
This audio extender makes sending audio signals a long distance a
breeze, especially if you have pre-existing Cat5e/6 cable. No power is
required to allow for portability and simplicity.
You May Also Consider
Product Reviews for Sewell Sound-Link Audio Extender Over Cat5e/6 - 2000ft (SW-32886)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!