Used by DIRECTV installer - 4x8 designed circuitry to optimally interface with all DIRECTV Dish Antenna Systems and all generations of DIRECTV satellite receivers.
This DIRECTV-APPROVED 4x8 Multi-switch contains specially-designed circuitry to optimally interface (RF, DC voltages and currents, channel/satellite selections, etc) with all DIRECTV Dish Antenna Systems and all generations of DIRECTV satellite receivers (IRDs). Typical off-the-shelf multi-switches may not be optimally designed for, and therefore may not work properly with all generation of DIRECTV systems.
The 4x8 Multi-switch is sealed so it can be used either indoors or outdoors. It operates in extreme temperature range from -34 degrees C to + 60 degrees C. It contains a power-on indicator to aid installation or trouble-shooting.
The AC/DC Module is equipped with a re-settable thermal circuit breaker to protect against damage due to shorts during installation
The AC/DC Module is designed for connection to the 4x8 multiswitch directly, or remotely via a commonly available RG-6 cable, up to 100 feet. F-F adapter is included.
May be substituted with Eagle Aspen 4x8 (DTV4X8) depending on availability
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).