DIRECTV SWM-8 Single Wire Multi-Switch With Power Supply (8 Channel) (SWM-8)
Model: SWM-8
Availability:In Stock
Eight channel Single Wire Multi-switch (SWM).Allows any transponder from any satellite input to be independently selected and distributed via one of eight designated SWM output frequency channels.
●
Die-cast housing is suitable for both indoor and outdoor use
●
Compatiable with the D12, R16, R22 all H and HR series receivers
●
Power Supply Included
Our Price: $139.99
MSRP: $499.99
You Saved $360.00
Die-cast housing is suitable for both indoor and outdoor use
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99°/101°, 103°/110°/119° satellites, plus two Flex Ports (95º sat and 72.5º sat)
Compatiable with the D12, R16, R22 all H and HR series receivers
Power Supply Included
Click the specifications tab to watch a video about the SWM-8 Multi-Switch.
For a compatible splitter(Not Included) which is needed for multiple receiver installations Click Here
Provides eight independent channels for supporting up to 8 DIRECTV satellite tuners
Provides two outputs to serve two customer dwellings (typical)
Contains a built-in di-plexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
Provides AGC for the satellite input signal
SPECIFICATIONS
The new SWM-8 allows installers to run an AT9 or AU9 DirecTV satellite antenna plus 2 Flex ports (72.5 & 95) down a single RG6 Coaxial cable! At the end of the single wire a SWS-2, SWS-4, or SWS-8 splitter is required (not included) to distribute the signal to as many as 4 DVRs or 8 HD receivers! Please Note the SWS series of splitters are specially designed for the SWM-8; you must have an SWS-2, SWS-4, or SWS-8.
The SWM Port Single Wire Solution is ONLY compatible with the H20, HR20 (Firmware .2042), H21, and HR21.
The three "Legacy" ports are compatible with all older Receivers, however, each single tuner receiver using the "Legacy" port requires a cable running directly to the SWM-8 unit. DVRs using the "Legacy" ports require 2 cables coming back to the SWM-8 unit. Features:
Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners
Provides two outputs to serve two customer dwellings (typical)
Contains a built-in diplexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
Provides AGC for the satellite input signal.
Die-cast housing is suitable for both indoor and outdoor use.
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99/101, 103/110/119 satellites, plus two Flex Ports (95 sat and 72.5 sat)
Uses only 1 RG6 between SWM-8 and STS Splitter (not included)
Maximum Distance from SWM8 to Splitter: 200
Power Supply Included SWM Port Compatible With:
HR20-100 through HR20-700 w/ .2042 Firmware Update
HR21-100 through HR21-700
H20-100 through H20-700 w/ .2042 Firmware Update
H21-100 through H21-700
R16-100 through R16-700
D12-100 through D12-700
D13-100 through D13-100
Specifications:
Satellite Input Frequency Range: 250 - 2150Mhz
Terrestrial & SMATV Input Frequency Range: 54 - 806Mhz
Return Path Input Frequency Range: 5 - 40 (CMTS return path must use 33-40 MHz band)
Number of Input Ports: 6 Satellite & 1 Terrestrial /SMATV
Input Signal Power Level: dBm -45 to -15 dBm per transponder
Satellite SWM Module Output Ports: 6 per SWM Module
Terr/SMATV/Return SWM Module Output Ports: 1 per SWM Module
Output Signal Power Level dBm -31 dBm (min) per SWM channel
DC Power: Power Supply (29Vdc, 1.5A)
Ground Stud: 1
Dimensions: LxWxH mm 167x145x35
Weight: kg 0.5
Operating temperature range: C -34 to +52
Use this product combined with others to provide service to more than 16 tuners in the home.
Read
our exclusive White Paper
DESCRIPTION
Eight channel Single Wire Multi-switch (SWM). Allows any transponder from any satellite input to be independently selected and distributed via one of eight designated SWM output frequency channels.
DIRECTV SWM16 Single Wire Multi-Switch (16 Channel) (SWM-16)
Description:
Sixteen channel Single Wire Multi switch (SWM).Allows each of the
two outputs to be split up to eight times for a total of Sixteen.Die cast housing is suitable for both indoor and outdoor use. Supports six (6) LNB inputs, ...
DIRECTV SWM16 Single Wire Multi-Switch With Power Supply
Description:
Sixteen channel Single Wire Multi switch (SWM).Allows each of the
two outputs to be split up to eight times for a total of Sixteen.Die cast housing is suitable for both indoor and outdoor use. Supports six (6) LNB inputs, ...
DIRECTV SWM-8 Single Wire Multi-Switch (8 Channel) (SWM-8)
Description:
Single Wire Multiswitch technology allows DIRECTV receivers and DVRs to
connect using a single wire.One wire can be split to add a second receiver line without going back to the multiswitch. More >Die cast housing is suitable for both ...
NEED TV ANTENNA HELP?
(0 Reviews)
