Solid Signal > Commercial Equipment > Distribution
These multiport, indoor/outdoor directional coupled taps are the most recent state of the art design, and feature our patented circuit design and surface mount technology
- 5 to 1000 MHz Bandwidth
- RFI greater than -100 dB
- Port to Port Isolation 23 dB minimum
- 75 Ohm Impedance
- Return Loss 20 dB typical, 18 dB minimum
- Available in the following dB values: 8T, 11, 14, 17, 20, 23, 26, 29, 32 dB
- The lowest value on any tap does NOT have an output, because there is no signal left to pass on
These multiport, indoor/outdoor directional coupled taps are the most recent state of the art design, and feature our patented circuit design and surface mount technology. These taps feature our unique dual tongue and groove cover installation to maintain better than -100 dB RFI integrity which minimizes or eliminates RF ingress or leakage. The housings are then further epoxy sealed to prevent any moisture absorption. The housings are zinc diecast with Tin Nickel plating for superior corrosion protection.
Available in 2, 4, and 8 port configurations with standard 3 dB tap value spacing for optimum system design. The 2 and 4 port models both use a small 1 3/4 x 1 3/4 housing and the 8 port model uses a 1 3/4 x 3 7/8 housing. These small sizes allow the taps to be installed in the tightest of locations. Each housing incorporates integral mounting slots and ground blocks for convenience. The taps have “F” ports for input and output, as well as for the tap ports. Tap ports are on 7/8 centers to allow for trap and filter installation.
You May Also Consider
Product Reviews for Toner Cable TGT4-XX 4 Output Indoor Directional Tap (TGT4-XX)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!