Availability: Usually Ships Same Day Limited Stock. Order Now! Condition:New
Your Price: $2199
List Price: $44.99
This 3x1 HDMI switch from Vericom is an elite performance device. It features an intelligent auto function that automatically selects the newly-powered-on source. This switch is HDMI High Speed and capable of passing through the highest resolutions up to 1080p and 3D. The WS1019 also supports a variety of capabilities, including: compressed audio, such as DTS® Digital, Dolby® Digital, DTS-HD Master Audio™, and Dolby TrueHD.
Ideal solution for TVs that have limited or hard-to-access HDMI ports
3-foot pigtail cord with gold-plated connectors
250 MHz/2.5 Gbps per channel bandwidth
Uncompressed audio, such as LPCM
12-bit per channel deep color
1080p video resolution
Supports 3D where applicable
Supports compressed audio such as DTS® Digital, Dolby® Digital, DTS-HD Master Audio™, and Dolby TrueHD
Product Reviews for Vericom 3x1 HDMI Switch with Intelligent Auto Switch (WS1019)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (4 reviews):
Recent Review: PhilK - Mt Airy, MD - 11/18/2014 My switch works as advertised
My switch works as advertised PhilK - Mt Airy, MD - 11/18/2014 2:56:03 PM It';s very interesting, I';ve read the two reviews here and I have had the exact opposite experience. My switch works flawlessly automatically switching whenever I turn a device on.
I suspect that the other two users have some kind of cable or satellite box attached to the switch and since this box is ALWAYS on (even then it is off) it keeps the switch locked on to its signal and thus will not switch automatically to some other device when it turns on.
From past experience I will say that the previous users have some kind of device plugged into the switch that is hogging the "automatic" function of the switch such as a cable or satellite DVR-tuner box. I tried that with a different automatic three-way switch and I noticed that when I had the DISH DVR box plugged into the switch it would [B}NOT[/B] switch automatically to anything else. So, I learned to plug the DISH DVR box into the TV';s HDMI-1 port and the three-way automatic switch into the TV';s HDMI-2 port for the other devices on that TV. I eventually picked up an iView box and so had three devices on the 3-way switch: the iView box, a Blu-Ray/DVD player, and an Internet video box. Then everything worked just fine, when the TV was switched to the HDMI-2 port the auto switch would switch to whichever box was turned on last.
I no longer have such a DVR/tuner box from a cable of satellite provider attached to my system. The second location only has two devices right now, an iView 3500STBII and a DVD player. The interesting think I noticed was that even if I was watching from the iView box and I turned on the DVD player it would then switch from the iView to the DVD player.
I don';t normally do that. I normally turn off the device I';m finished with and then turn on the other box and the switch has automatically switched to the now turned on device every time. So, I decided to test again the other way around. I put in a DVD and then turned on the iView box to see if the switch would then change to the iView the way it had changed to the DVD, then I tuned off the iView to see it if would switch back to the DVD player.
So, with nothing on I turned on the DVD player and the switch responded and I was able to watch a DVD. I then kept the DVD running and turned on the iView box and the switch cut the connection from the DVD and went to the iView box. Last I tuned off the iView box and the TV first showed lost signal and then the switch went back to the DVD player and I was able to continue watching the DVD.
I did the same test starting with the both devices off and then turning on the iView box and the switch changed to the iView and I was able to watch the TV station from the iView box, or watch a recorded program on the attached jump-drive plugged into the iView box. I then turned on the DVD player without first turning off the iView box and again there was a brief "no signal" message from the TV and then the DVD started up and I was able to watch the DVD. I then turned off the DVD player and the switch went back to the iView box and I was again watching a TV program.
So, as far as I';m concerned this switch works as advertised.
Not automatic GCJBS - Cedar Rapids, IA - 1/14/2014 5:39:22 PM I replaced a perfectly good switch with this one because it was supposed to switch automatically. Unfortunately it doesn';t. It works fine when switching manually but the design of having cables come in on one side and out the other has it taking up a lot of space. My other switch had the cables coming in and out of the back, making them unseen. This product is too obtrusive to use as a manual switch unless you like having large cables visible since the switch has to be accessible because it doesn’t work automatically.
Doesn't work automatically KG - Box Elder, SD - 3/4/2015 11:35:30 PM Does not work automatically for me, no matter what I hook up. Works okay manually, but is an awkward looking piece of hardware to keep readily available and visible.
Nothing Auto About It JIH - Roseville, CA - 1/8/2014 7:49:00 PM Hooked up three devices and no matter how you turned the power on them on and off the "automatic switch" did nothing. Tech support could only come up with "You need to push the button on the "switch" to get them to switch"
The ELE8080 HDMI™ extender boosts audio/video transmission distance up to
60m (200ft) in HDTV 1080i format. Using TWO low cost Cat-5/5e/6 UTP cables, users can easily extend HDTV sources from DVD players, Blu-ray Disc players, PS3, PC, and any ...
The SB-6225 is a transmission of HDMI over CAT5/6 category
cable wires for 30M length which supports HDMI 480i/P, 576i/P, 720P(50/60Hz), 1080i and 1080p(50/60Hz). The best install between the HD DVD player and HDMI display monitor with 15M HDMI ...
3x1 Selector HDMI Switch connects three HDMI audio/video devices (digital
DVD player, satellite receiver) to a HDTV display.. Features. Allows switching between three sources with HDMI inputs to one HDMI output. Ideal for home theater, conferences, conventions, restaurants, school ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).