Solid Signal > Sirius-XM Satellite Radio > Sirius-XM Antennas
InLogis/Pixel Technologies XM Ready Antenna Pro-Pack (XMR-1)
No Reviews Available
Be the first to write one!
This kit is for use with “XM Ready” receivers and includes a PRO-500 Professional High Gain Antenna System, a CNP 2000 MiniTuner and a CNP2000H Home Dock.
- Includes all cables required to mate with the antenna and receiver
- High–Gain Professional Antenna
- Can drive up to 200 ft of standard RG-6 cable
- Line amps available for longer runs
- Standard F-connector output
• High–Gain Professional Antenna
drive up to 200 ft of standard RG-6 cable
• Line amps available for
• Standard F-connector output
Includes all cables required to mate with antenna and
• XM Mini-Tuner
• Docking Port
the antenna with a clear view of the sky outdoors pointing approximately due
South at an
elevation angle of 45º.
2. Connect the docking port and mini-tuner as
shown above to the antenna and receiver.
3. Use the accessories menu
on the radio to locate the XM signal strength read out.
4. Adjust the
elevation and azimuth angle of the antenna to maximize the signal strength on
one of the XM
satellites. Both satellites (Rock &
Roll) carry redundant content and are located at 115º W. Long and 85º W
Exact pointing angles to the satellites based on zip code can be obtained here. However
antenna has over a 30º beam width, exact
pointing angles are usually not required to achieve a good signal
Adjust the antenna until the signal strength is 75% or higher and lock the
antenna in place.
Here are available downloads related to this product:
You May Also Consider
Product Reviews for InLogis/Pixel Technologies XM Ready Antenna Pro-Pack (XMR-1)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!