Eton ARCFRX1WXW American Red Cross Hand Turbine AM/F...
$21.99
 
See all of today's deals

  Home   |   Cell Phone Accessories   |   Signal Boosters   |   zBoost YX550-VLTE-AWS-UPGRADE  
  < Shop All Signal Boosters  
 

0 Stars Average Rating (0 Reviews) Read Reviews
Write a Review

 

Wi-Ex zBoost YX550-VLTE-AWS-UPGRADEKIT zBoost SOHO YX545 4G Upgrade Kit To Quad Band VERIZON 4G LTE and T-MOBILE 4G Only - Upgrade Kit (YX550-VLTE-AWS-UPGRADEKIT)

View other zBoost products
Model: YX550-VLTE-AWS-UPGRADE  |  SKU: <854584003281
Availability:  Discontinued (Not Available)
For use with the 4G Verizon LTE and 4G T-Mobile only! The zBoost SOHO DataBlast Upgrade phone signal booster speeds 4G data on the Verizon LTE & AWS networks when paired with an existing booster, extending a 4G Cell Zone™ indoors for multiple devices.It is simple to set up and includes everything you need, making it perfect for the home or office.
●  Speeds data up to 20X faster*
●  Supports multiple users simultaneously
●  Improves upload and download speeds
●  Easy to set up – comes complete with everything you need
●  No cradle or connections to your phone
 
 

FEATURES

  • Increases indoor 4G data speeds on Verizon LTE & AWS networks when paired with an existing 2G/3G booster
  • Speeds data up to 20X faster*
  • Supports multiple users simultaneously
  • Improves upload and download speeds
  • Easy to set up – comes complete with everything you need
  • No cradle or connections to your phone
  • Extends phone battery life (uses less power when signal is stronger)
  • Protects the carrier network using patented technology
  • Speed is dependent on proper installation and property characteristics
  • Watch the Exclusive Video
  • The YX545 DOES NOT benefit iDENTM (trademark Motorola), NextelTM (trademark Nextel Communications Corp)

SPECIFICATIONS

Setup overview:

The package includes everything you need: base unit, base unit antenna, power supply, signal combiner, signal antenna and mounting hardware. The quad-band omni-directional signal antenna receives signals from multiple cell towers.


FIRST: Replace existing Signal Antenna with zBoost Quad Band Antenna.

Verify that the location of the Signal Antenna is in the area of strongest signal. The coverage your zBoost DataBlast provides is largely determined by the quality of signal received by the Signal Antenna. If your best signal is 1 bar, your coverage will be limited to one small room.

Important: By joining two signal boosters to a single exterior antenna, signal could be reduced by as much as 3dB.




In the area of best signal, identify the best location for attachment of the mounting bracket – such as an attic cross or main beam and place the Signal Antenna at or near that location. Important: Assemble the Signal Antenna mounting bracket as shown below.
Keep the Signal Antenna at least 3 feet above any metal such as wiring, A/C ducts, metal siding, truss plates, etc. When connecting the cable to the antenna, run the cable straight down from the antenna. Avoid draping the coax near the antenna.

SECOND: Disconnect the coaxial cable from the existing booster Base Unit and connect to the zBoost Signal Combiner.

Existing RG-59 or RG-6 should not exceed 50 feet. If the cable length exceeds 50 feet, it should be replaced with RG-11. RG-11 should not exceed 100 feet.

The zBoost DataBlast requires at least 15 feet of vertical separation between the Base Unit and the Signal Antenna. Generally, increasing this distance (up to 40 feet) will increase the performance and decreasing the distance will limit the performance of both boosters.

THIRD: Connect one end of the zBoost Signal Combiner to the DataBlast Base Unit and the remaining end to the existing booster.

Assemble the Base Unit and Base Unit Antenna and position the antenna vertically. This Base Unit uses an omni-directional antenna that delivers signal in a circular pattern around the antenna. Place the Base Unit in desired location – where you want to create a Cell Zone™. For the widest possible signal area, it is recommended that you position the Base Unit near the middle of a room.

The Base Unit can be placed on a flat surface (e.g., a bookshelf, desk, end table, etc.) and performs best when located at least 4 feet above the floor or approximately the height of a cell phone when it is typically in use (avoid placing the Base Unit on the floor).

Keep the Base Unit at least 2 feet away from other cords, metal objects or other wireless devices such as wireless routers or wireless access points. The zBoost DataBlast performs best when there are no obstructions between the Base Unit and your mobile device.

Important: The cable connections should remain hand-tight. Once you have the base units in their permanent location, verify that all three connections remain secure.

FOURTH: Connect the DataBlast Base Unit to the provided power supply and plug into a power outlet.

When your zBoost system is in place and fully connected, walk throughout your home or office and verify that you have fast, reliable data speeds. If the signal strength has improved, your zBoost is working. Remember, coverage varies based on outdoor signal level, building construction, and antenna placement. Coverage in adjoining rooms will be reduced by walls and building materials.

For increased performance, an upgrade Signal Antenna (CANT-0041) is recommended.

Upon initial power up, a solid GREEN light should appear indicating normal conditions. If a RED light appears, adjustments may be needed to optimize performance. If you find the increased signal coverage is acceptable, however, no additional adjustments are needed. See Base Unit Light Indicators below for more information.

Note: Phones display only LTE OR voice signal at any given time. The best indicator of product’s performance is data speed and voice coverage.


Upon initial power up, a solid GREEN LED should appear indicating normal conditions. If a RED light appears, adjustments may be needed to optimize performance. If you find the increased signal coverage is acceptable, however, no additional adjustments are needed.

Should you desire to improve coverage, you may:

  • Relocate the Signal Antenna in order to capture a better signal –higher is usually better.
  • Increase the distance between the Base Unit Antenna and the Signal Antenna.

LED Base Unit Indicators





At Initial Power Up Only

Solid GREEN

Normal condition at power up.

Slowly Alternating RED and GREEN

zBoost is working, but at reduced performance and coverage due to “non-ideal” setup.

Solution: Increase the distance between Signal Antennas and Base Unit Antenna to  achieve maximum performance and coverage.

Fast Flashing RED

Indicates insufficient distance between the Signal Antennas and the Base Unit Antenna. The amplifier is operating at significantly reduced coverage.

Solution: Increase distance between Base Unit Antenna and Signal Antennas.

 Solid RED

System is receiving signal from either the mobile device or the base station transceiver that is too strong for proper operation.

Solutions: (1) Move away from receiving antenna with your cell phone. (2) Move antenna away from other devices.

Fast Alternating RED and GREEN followed by no light

The amplifier is disabled.

Solution: Unplug and start over.

 After Initial Power Up

Solid GREEN

Normal condition.

Blinking GREEN

Inconsistent power source – power supply may need to be replaced. Contact technical support.

Solid RED

System is receiving signals from either the mobile device or the base station transceiver which are too strong for proper operation.

Solution: Please unplug your system. Re-orient your Signal Antenna and/or Base Unit Antenna to reduce the excessive signal source.

DESCRIPTION

For use with the 4G Verizon LTE and 4G T-Mobile only! The zBoost SOHO DataBlast Upgrade phone signal booster speeds 4G data on the Verizon LTE & AWS networks when paired with an existing booster, extending a 4G Cell Zone™ indoors for multiple devices. It is simple to set up and includes everything you need, making it perfect for the home or office.

REVIEWS

Product Review Summary
Product Reviews for Wi-Ex zBoost YX550-VLTE-AWS-UPGRADEKIT zBoost SOHO YX545 4G Upgrade Kit To Quad Band VERIZON 4G LTE and T-MOBILE 4G Only - Upgrade Kit (YX550-VLTE-AWS-UPGRADEKIT)


No Reviews Available.

Be the first to write a review for this product!



  YOU MAY CONSIDER
Wi-Ex zBoost YX044-F30 Outdoor Signal Antenna Lightning Arrestor Commercial Grade (YX044F30)
Wi-Ex zBoost YX044-F30 Outdoor Signal Antenna Ligh...
$59.99
Surecall SC-DUALH-O-72-YD-KIT Dual-band Cell Phone Signal Solution for Homes and Small Offices (SC-DUALH-O-72-YD-KIT)
Surecall SC-DUALH-O-72-YD-KIT Dual-band Cell Phone...
$373.99
Wi-Ex zBoost ZB245 In-Vehicle Cell Phone Signal Booster for a Single User (ZB245)
Wi-Ex zBoost ZB245 In-Vehicle Cell Phone Signal Bo...
$79.99
Surecall Fusion5 Omni Dome Kit (SC-PolyH-O-72-OD-KIT)
Surecall Fusion5 Omni Dome Kit (SC-PolyH-O-72-OD-K...
$1,299.00

RECENTLY VIEWED
 
     
     
 ©1999-2014 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail