Winegard HDA200 24dB Distribution Amplifier (HDA-200)
$38.99
 

Home   >   Cable & Wire Supplies   >   RG-6 Cut-to-Length   >   Solid Signal SSCBLQ

Solid Signal Custom Cable Lengths RG6 Quad Shield w/Connectors(SSCBLQ)

Click Images to Enlarge

Solid Signal Custom Cable Lengths RG6 Quad Shield w/Connectors(SSCBLQ)

Brand: Solid Signal           P\N: SSCBLQ          

No Reviews Available  Be the first to write one!


Availability: Usually Ships Same Day
Condition: New


Your Price: $699 - $67



Select Option:

Qty:


Call Us For Free Tech Support! Your Purchase is Secure with Solid Signal. View our Frustration Free Return Policy


Description


Solid Signal Select Your Length - Quantity Discounts Available (Minimum 20).

Select the custom cable length for any home or commercial installation. This solid copper conductor cable is ideal for satellite, off-air or cable TV setups. Reduce signal loss by only running the amount of cable necessary.


Features


  • Each cable is tested for ground and tip continuity

  • Reduce signal loss by only running the amount of cable necessary

  • Save money by eliminating the need for expensive compression and stripping tools

  • Avoid clutter by organizing your audio video system

  • RG6 Quad cable is a must for any high def install

  • Reduce interference from power lines, other cables and radio frequencies with quad shielded protection

  • Meets same requirements as DIRECTV, Comcast, DISH Network, Road Runner, Time Warner Cable, Cox Communications, and Charter Communications Cablevision.

  • Connectors may be substituted with the Digicon S-Series Connectors DS-6

  • Can be Buried in a conduit or PVC pipe

Specs


Coax Sizing (inches) Min ~ Max
Center .0399 ~ .0418
Dielectric .180 ~ .193
Outer Jacket .265 ~ .305

Coax Sizing (mm) Min ~ Max
Center 1.01 ~ 1.06
Dielectric 4.57 ~ 4.90
Outer Jacket 6.73 ~ 7.75

The FS6U is our Universal "F" type connector that fits most RG6 standard, tri-shield, and quad-shield coaxial cable.

• 75 Ohm Construction
• DC-1 GHz > 30 dB Return Loss < 1.07 VSWR
• DC-2 GHz > 26 dB Return Loss < 1.10 VSWR
• DC-3 GHz > 23 dB Return Loss < 1.16 VSWR
• Cable Pullout Force Exceeding 65 in/lbs.
• Body Material Brass
• Body Material (Plating) Nickel
 

 

Frequency (Hz)

5 MHz

15MHz

550 MHz

750 MHz

1000 MHz

2000 MHz

3000 MHz

dB

-
43.4 dB

-44.2 dB

-42.1 dB

-41.4 dB

-43.1 dB

-31.8 dB

24.1 dB
 

Mechanical
Requirements

Specifications

Limits

Test Results

Corrosion Resistant Telcordia™ GR-1503 3.2.1 Conforming Materials Exceeds
Cable Application Telcordia™ GR-1503 3.2.2 <20 lbs.Max Insertion Exceeds
Cable Interface Telcordia™ GR-1503 3.2.3 >40 lbs. Pull Force Exceeds
Equipment Interface Telcordia™ GR-1503 3.2.4 >10 matings Without Damage
>60 in./lbs.Without Damage
Exceeds
Temperature Cycling with Humidity Telcordia™ GR-1503 4.1 70 °F to 140 °F to -40 °F
Must Pass 3.2.3 Specifications
After 7 Days
Exceeds
Loosening Torque Telcordia™ GR-1503 4.2 >30 in./lbs. After 3 Days of 4.1 Exceeds
Moisture Migration SCTE IPS-TP-013 No Dye Penetration Exceeds
Salt Fog Telcordia™ GR-1503 4.4 Return Loss >30 dB @ 1 GHz Exceeds
Environmental Pollutants Telcordia™ GR-1503 4.5 Return Loss >30 dB @ 1 GHz Exceeds
Vibration Telcordia™ GR-1503 4.6 Loosening Torque >32 in./lbs Exceeds
Chemical Resistance Outdoor1 Telcordia™ GR-1503 4.7 7 Days Exposure Exceeds
UV Degradation1 Telcordia™ GR-1503 4.8 7 Days Exposure Exceeds
Ozone Degradation1 Telcordia™ GR-1503 4.10 70 Hours Exposure Exceeds
       
Electrical
Requirements
Specifications Limits Test Results

Insulation Resistance Telcordia™ GR-1503 3.5.1 >5,000 megohms @ 100 V dc Exceeds
Dielectric Strength Telcordia™ GR-1503 3.5.2 >1 kV ac for 1 Minute Exceeds
Insertion Loss Telcordia™ GR-1503 3.5.3 <0.1 dB to 350 MHz
<0.2 dB to 700 MHz
<0.3 dB to 1 GHz
Exceeds
Return Loss Telcordia™ GR-1503 3.5.4 >30 dB to 1 GHz Exceeds
Shielding Effectiveness Telcordia™ GR-1503 3.5.5 >95 dB to 300 MHz
>70 dB to 1 GHz
Exceeds


Note 1: Samples will not exhibit cracking, swelling or brittleness. Digicon connectors were tested to meet SCTE-IPS and TelecordiaTM specifications. Where both organizations have specifications for the same requirement, Digicon connectors were tested to the more rigorous requirement.



Discuss





RELATED SEARCHES







Product Reviews for Solid Signal Custom Cable Lengths RG6 Quad Shield w/Connectors(SSCBLQ)


Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of what to expect with the product. Write a Review!



  RELATED PRODUCTS
Related Products


Dish Network Authorized Retailer Solid Signal is an authorized retailer of DISH Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service marks are used under license of DISH Network L.L.C. and/or its affiliate(s).
 ©1999-2015 Solid Signal, Signal Group LLC & Affiliates
  We accept: Checks accepted by Mail