One of the few cell phone boosters that covers BOTH the 800 and 1900 Mhz frequencies simultaneously
Product has a one year warranty for parts and labor from the manufacturer
Improved battery life of your cell phone
The YX545 DOES NOT benefit iDENTM (trademark Motorola), NextelTM (trademark Nextel Communications Corp)
Up to 5,500 square feet of coverage!
Not sure what frequency your cell phone operates in? Cell phone service providers operate on different frequency ranges depending on your location. For more information, weve created a "How To" for determining your cellular frequency range, more>>
50ft of RG-6 low loss connection cable is provided to connect the antenna to the base unit. Should you need a longer (replacement, not addition to) cable, we have them available in various lengths (60ft, 70ft, 80ft, 90ft, and 100ft lengths)
The package includes everything you need: zBoost amplifier base unit, directional base unit antenna, power supply, coaxial cable (RG-6), industrial grade signal antenna and mounting hardware. The wide radio wave beam width directional antenna receives signals from multiple cell towers.
Increases indoor signal coverage-up to 5500 sq ft
Decreases dropped or missed calls
Increases signal strength for better voice and data transmission
Extends phone battery life (uses less power when signal is stronger)
Supports multiple users simultaneously
No cradle or connections to your phone
Easy to set up – comes complete with everything you need
Compatible with all U.S. carriers and mobile devices using 800 & 1900 MHz (except Nextel/iDEN or 4G)
PCS band Frequency Uplink:1850 to 1910 MHz Downlink: 1930 to 1990 MHz System Gain 67dB PCS band supported A, D, B, E, F, C Networks CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
Cellular band Frequency Uplink: 824 to 849 MHz Downlink: 869 to 894 MHz System Gain 67dB Cellular band supported A, B, A’, B’ Networks CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS, HSPA, 3G
General Power Consumption – Power Supply Current 3W standby; 7W max signal - 2.0A Max Wall Supply Input; Voltage 100-240VAC 50-60 Hz ; 5.0VDC System Certifications FCC Parts 15 & 24 (PCS) and Parts 15 & 22 (CEL), Industry Canada Base Unit Size and Weight 5” x 7” x 1.25” – 9 oz. Operating Conditions Indoor Use Only (40O- 105O F) Coverage (open areas) Up to 5500 sq ft within 70 degrees bandwidth
The package includes everything you need: base unit, base unit antenna, power supply, coaxial cable RG-6 (50 feet), signal antenna and mounting hardware. The omni-directional signal antenna receives signals from multiple cell towers.
Before installing, please note the following important factors in determining your zBoost performance:
* At least 15 vertical feet is needed between the Signal Antenna (receives the outside signal) and the Panel Antenna (rebroadcasts the signal indoors). Separation less than 15 vertical feet will result in decreased performance. See illustration below. * Keep the Signal Antenna at least 3 feet above any metal
FIRST: Mount the Signal Antenna. Choose a location for the Signal Antenna using your cell phone to determine the area of strongest signal.
Choose a location for the Signal Antenna using your cell phone to determine the area of strongest signal - typically found outside, above the roofline or in an attic. The antenna must also remain at least 3 feet from any metal. Keep in mind that the coverage zBoost provides is largely determined by the quality of signal received by the Signal Antenna. If your best signal is one bar, your coverage will be limited to one small room.
SECOND: Install the Base Unit and Panel Antenna.
The Base Unit can be easily mounted on a wall by first removing the orange bracket from the Base Unit and using the provided mounting hardware to affix to wall. Connect the Indoor Panel Antenna to the Base Unit using the provided 10’ RG-8 coax.
The Panel Antenna should be mounted on a wall facing the direction where increased coverage is desired. Note that signal is broadcasted in a beamwidth of 70° horizontally and 60° vertically from the front of the Panel Antenna. Keep the Panel Antenna off floor and at least 3 feet away from other cords, metal objects or other wireless devices such as wireless routers or wireless access points.
The zBoost Xtreme performs best when there are no obstructions between the Panel Antenna and your mobile device. The zBoost SOHO Xtreme requires at least 15 feet of vertical separation between the Panel and Signal Antennas. Generally, increasing this distance (up to 40 feet) will increase the performance and decreasing the distance will limit zBoost performance.
THIRD: Run the provided coaxial cable between the Base Unit and Signal Antenna.
Use the provided 50 feet of RG-6 cable to connect the Signal Antenna and the Base Unit. Should you need additional cable length, 15 foot extensions (Part #: YX030-15w) are available at www.Wi-Ex.com. Please note: Cable longer than 65 feet is not recommended.
FOURTH: Connect the zBoost Base Unit to the provided power supply and plug into a power outlet.
When your zBoost system is in place and fully connected, walk throughout your home or office and verify that you are able to reliably place calls. If the signal strength has improved, your zBoost is working. Remember, coverage varies based on outdoor signal level, building construction, and antenna placement. Coverage in adjoining rooms (next to, above, or below) will be reduced by walls and ceiling/floors.
Upon initial power up, a solid GREEN LED should appear indicating normal conditions. If a RED light appears, adjustments may be needed to optimize performance. If you find the increased signal coverage is acceptable, however, no additional adjustments are needed. See LED Indicator section for more information.
Should you desire to improve coverage, you may:
Relocate the Signal Antenna in order to capture a better signal –higher is usually better. Increase the distance between the Base Unit Antenna and the Signal Antenna. Call us!
Here are available downloads related to this product:
Product Reviews for Wi-Ex zBoost SOHO YX545x Cell Booster Kit Covers Up to 5500 sq ft (YX545x-PCS/CEL)
Product reviews help other customers decide which product to purchase, where the best deals are, and your get a sense of
what to expect with the product. Write a Review!
Average Review (1 reviews):
Recent Review: Roadhammer - Central Florida, Central Florida - 12/7/2012 I can hear them now...
I can hear them now... Roadhammer - Central Florida, Central Florida - 12/7/2012 I live in a fringe area with horrible cell signal.Im lucky to have one bar standing outside my house and would still drop calls.My house has lots of steel and basically the phone was useless inside.I called and the technician was very helpful in recommending this model as being able to achieve what I wanted versus the more expensive Wilson unit.I have a 50 tower to mount the antenna on a
Bosch NBC-255-P Compact Dual Streaming 2.810mm VF IP
Description. BOSCH NBC-255-P IP Camera Compact network video system. Progressive
scan, dual streaming H.264 and M-JPEG SD/SDHC storage. Two-way audio 2.8-10MM VF LENS. Features. Description: The Bosch NBC-255-P IP camera is a ready-to-use, complete network video surveillance system inside ...
Solid Signal is an authorized retailer of DISH
Network L.L.C. DISH, DISH Network and DISH Network logos are trademarks, registered trademarks and/or service marks
of DISH Network L.L.C. and/or its affiliate(s). The DISH Network trademarks, registered trademarks and/or service
marks are used under license of DISH Network L.L.C. and/or its affiliate(s).