Satellite Signal Amplifier
- Drake DA7533 Distribution Amplifier (DA7533)
The R.LDRAKE models DA100042, DA100032, DA8642, DA8632, DA7543, and DA7533, are broadband distribution amplifiers designed for indoor use in both residential and commercial buildings where RF signal distribution in the frequency range of 49 to 1000 MHz is required. More >No return path. Passive return path with variable 10 dB attenuator.. Built in active return path.. Product DA7533 Specification Sheet
- DIRECTV SA-6AL In-Line Trunk Adjustable Amplifier w/ LEDs (SA-6AL)
Provides adjustable in-line truck amplifi cation with LED signal level indicators.Simplifies MDU installations by providing an adjustable in-line trunk amplifier with signal evel LED indicators for proper operation. Supports Ku and Ka-band ODU installations. Low power consumption and wide dynamic range. This unit requires a power supply that is sold separately
- Pixel Technologies XM/Sirius Radio SBA Inline Amplifier (SBA-1)
Works with both XM and Sirius Satellite Radio antennas.For use with Signal Distribution Kits for increasing DB gain.Able to extend any home / commercial antenna to desired length. Designed to work with RG-6 satellite grade cable. Every 125 feet requires 1 in-line amp. XM Radio certified. For cable runs over 250 feet we recommend the PS-1 Power Inserter. Product SBA-1 Technical Document (1). For use with Signal Distribution Kits for increasing DB gain Every 125 ...
- Lava A-01 Inline Amplifier (A01)
- Pico Digital LA-2150D In-Line 950-2150Mhz Amplifier (LA-2150D)
Satellite In-Line Amplifier, Bandwidth: 950-2150 MHz, Gain: 16~20dB Sloped, Noise Figure: 5dB, Power Input: 12~18VDC, Power Required: 0.7W.Amplify the satellite signal before long runs and/or combining, splitting, or multi-switching.. In-line amplifier is powered by the voltage already present on the satellite signal coax.. Amplifies signals from 950-2150Mhz.. Product LA-2150D Specification Sheet
- Spaun 28dB Satellite In-Line Amplifier (SVF128F)
For long cable runs between the satellite dish and the receiver, this amplifier will boost the signal a full 20dB.Compensates for line loss.Plug in amplifier with tilt compensation. DC pass thru. Level adjust 0 -10 dB. Fully compatible with all DBS systems. Easy installation. All SPAUN products meet the highest standards for durability and reliability
- ShinyBow SB-5659 1x16 HDMI Distribution Amplifier (SB5659)
The SB-5659 one (1) input x sixteen (16) output HDMI distribution amplifier allows users to connect any digital video source, such as: DVD, Satellite, Cable Box, and more with up to sixteen 16 digital HDMI displays.The SB-5659 splits HDMI signal without signal loss maintaining high resolutions.Support 1x16 HDMI Distribution Amplifier. Auto-Scan input and outputs status via LED display on front panel. Control by Selection buttons on front panel and use IR Remote Controller. Support IR ...
- Sonora LA281R-T SWM Extension Line Amplifier (LA281RT)
Model LA281R boosts cable and DBS signal levels off setting the loss of 300 feet of RG-6 while passing data modem and receiver control signals from the receiver to the switch.Indoor / Outdoor 54 to 2400 MHz DBS line powered amplifier with forward gain and subband 2 to 40 MHz passive return.. Provides 28 dB of gain which off sets an additional 300 ft of RG-6 or 400 feet of RG-11 cable runs. Passes 2 ...
- Pico Digital MPA-HD Mast-Mounted HDTV Pre-Amplifier (MPA-HD)
Digital signal optimized mast-mounted pre-amplifier.Incorporated 75Ω F-type input and output interface, providing optimum connection. 6kV Lighting surge protected. Weather-protected connections. Mounting hardware included. External 117VAC 60Hz 5W power source. UL Approved. This product is considered a special order item, and is non-returnable. Please make sure this is the correct version/channel/option for your situation.. Digital signal optimized mast-mounted pre-amplifier. 68 Off-air ...
- Sonora Design TAMP6-T12 6 Input DIRECTV Amplifier (SD SA-6AL-T)
Indoor / Outdoor 54 to 2150 MHz DBS line powered amplifi er with automatic gain and optional external powering.Model SD SA-6AL provides automatic gain controlled outputs of -20 dBm @ 2150 MHz with 32 equal input transponders. The LED indicators turn Green with an input of -28 dBm to -50 dBm.. Automatic gain simplifi es the design and the installation knowing that the amplifi er output is -20 dBm when the LED lights are Green.. ...
- Sonora LA281R-T24 Line Amplifier (LA281R T24)
Indoor / Outdoor 54 to 2400 MHz DBS line powered amplifier with forward gain and subband 2 to 40 MHz passive return.This product is a universal coaxial amplifier. More >Model LA281R extends SWM drop distances while passing the 2 MHz control signals. The SL5S LNB and is powered via the LA281R-T power supply.. SL5S switches include automatic gain control for a constant -30 dBm output. The SL5S is remotely located at 150 feet from the ...
- Shinybow SB-3706 1x8 Video (RCA) Distribution Amplifier (SB3706)
SB-3706 is a compact composite video distribution amplifier which supports 1-8 outputs.Ideal for distributing video signals from DVD, video game console, satellite receiver, Cable/Satellite Box, etc. More >Maintains high resolution video signal over long distance output cables. All Outputs are mirrored. Wall/Desk mountable. Inputs: 1 x RCA (female). Outputs: 8 x RCA (female). Dimensions (L x W x H): 6.40 x 3.14 x 1 (inch). Supports pal and NTSC signals. SB-3706 will support high resolution ...
- Atlona 1x10 Component VideoAudio Distribution Amplifier over Cat5/6/7 (AT-COMP10SS)
The Atlona AT-COMP10SS is a 1 x 10 component video with stereo analog and/or digital audio distribution amplifier.It is designed to accept a video and audio feed from a component video source such as a DVD player, cable/satellite box, media player or digital signage player and distribute a source to up to 10 locations. More >Extends a component video with stereo analog and/or digital audio signal up to 1000ft away to 10 locations.. Supports full ...