CommScope DryLine Dehydr, LoPressure Membr 115/230 (MT050C)
- Brand: CommScope
- P\N: MT050C
- UPC: 646444270458
Live Chat
Contact Us
Description
Introducing the CommScope DryLine Dehydrator MT050C
Keep your antenna systems operating at peak performance with the CommScope DryLine Dehydrator MT050C. This high-quality, low-pressure membrane dehydrator is designed to remove moisture from your antenna systems, ensuring optimal signal strength and reliability. With its versatile mounting options and advanced features, the MT050C is the perfect solution for maintaining your antenna systems in any environment.
Key Features:
- Automatic membrane dehydrator for efficient moisture removal
- Low-pressure operation for optimal performance
- 19-inch rack mountable and wall mountable for versatile installation
- Adjustable output pressure between 2-6 psig for customized performance
- Summary and discrete alarms for easy monitoring
- 115/230 Vac, 50/60 Hz power compatibility
- Compatible with a wide range of antenna systems
Don't let moisture compromise the performance of your antenna systems. Invest in the CommScope DryLine Dehydrator MT050C today and experience the benefits of reliable, moisture-free operation. Order now and take the first step towards optimal antenna system performance!
Specifications
Product Classification
| Product Type | Dehydrator |
| Product Brand | DryLine® |
General Specifications
| Alarm Type | Discrete | Summary |
| Circuit Breaker Requirement | Electrical connections require separate circuits for dehydrator installation |
| Dehydrator Type | Automatic Membrane |
| Dew Point | Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F) |
| Excess-Run Alarm | 10 minutes, factory set |
| Flow Rate, nominal | 3.4 SLPM |
| High-Humidity Alarm | 7.5% RH, factory set |
| Low-Pressure Alarm | 68 mbar | 7 kPa | 1 psig |
| Mounting | Bench | Floor | Rack | Wall |
| Port Count | 4 |
| Port Type | 3/8 in PE tube |
| Power Cord | Europe power cord with stripped leads | USA power cord |
| Power-Fail Alarm | Loss of input power |
| Rack Type | EIA 19 in | ETSI N3 (optional) |
| Rack Units | 4 |
| Regulated Output Pressure Type | Factory set |
| Regulated Output Pressure, maximum | 41.4 kPa | 6.005 psig |
| Regulated Output Pressure, minimum | 14 kPa | 2.031 psig |
Dimensions
| Product Height | 172.7 mm | 6.799 in |
| Product Width | 439.4 mm | 17.299 in |
| Product Depth | 419.1 mm | 16.5 in |
| Volume Capacity, maximum | 1.699 m³ | 60 ft³ |
| Volume Capacity, minimum | 0 m³ | 0 ft³ |
Electrical Specifications
| Alarm Contact Rating | Form C dry contacts, 2 amps at 30 Vdc |
| Power Consumption, at runtime | 220 W |
| Power Consumption, average | 6.6 W |
| Power Consumption, maximum | 220 W |
| Power Consumption, minimum | 0.2 W |
| Power Frequency | 60/50 Hz |
| Power Phase | Single |
| Suggested Circuit Breaker Size | 15 A |
| Voltage | 115/230 Vac ±10%, selectable |
| Voltage Type | ac |
Environmental Specifications
| Operating Temperature | -10 °C to +50 °C (+14 °F to +122 °F) |
Packaging and Weights
| Height, packed | 312.4 mm | 12.299 in |
| Width, packed | 502.9 mm | 19.799 in |
| Depth, packed | 541 mm | 21.299 in |
| Included | 3/8 in polyethylene tubing | 90º elbow fitting | Instruction sheet | Male connector fitting | Needle valve | PTFE tape | Power cord |
| Weight, gross | 23 kg | 50.706 lb |
| Weight, net | 20 kg | 44.092 lb |
Regulatory Compliance/Certifications
| Agency | Classification |
|---|---|
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality management system |
| ROHS | Compliant/Exempted |
CHINA-ROHS | Above maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision on www.commscope.com/ProductCompliance |
| UK-ROHS | Compliant/Exempted |
Downloads
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov